The Math
Feel free to skip right over this part, this is the boring part, it’s so boring I thought of putting a picture of an artistic nude shot next to it just to keep people awake. Ok, so here we go. Before you can calculate the depth of field you first must know the circle of confusion for your camera.

Don’t get too lost on me yet, for most of us digital SLR users this is  one of two numbers. For most of us with APS/APS-C sized sensors this number is 0.019948, for full frame sensors (the big Pro cameras) and 35mm film the number is 0.02501. This represents the sensor size. Again, don’t get all lost on me yet, just remember the number for your particular camera.

The first thing we need to calculate is the Hyperfocal distance, for this calculation you will need to know the focal length of your lens. the aperture you are using and the CoC (circle of confusion) for your camera.

The math to calculate the hyperfocal distance is as follows:

HyperFocal = (FocalLength * FocalLength) / (Aperture * CoC)

Thus, the Hyperfocal distance of a 50mm lens at f/2.8 on an APS sensor (Canon 30D in my case) is 146.85 feet.

Next we need to calculate the near point which is the closest distance that will be in focus given the distance bdetween the camera and the subject. The math here (yes, it gets SO much worse) is as follows:

NearPoint = (HyperFocal * distance) / (HyperFocal + (distance – focal))

This is somewhat  complicated because the focal length is in millimeters and those of us in the US are better with feet and inches still so if you want the end value to be in feet you have to do some more conversions. If we are using the same 50mm lens, at f/2.8 on an APS sensor at a distance of 10 feet (3048mm) then our HyperFocal distance is 146.85 feet (44,749.23mm), giving us a near focus point of 9.37 feet (2,856.66mm). Are we following along still? Did I lose anyone?

Alrighty then, let’s now calculate the far point distance, this is almost the same as before but using slightly different math, so here we go.

FarPoint = (HyperFocal * distance) / (HyperFocal – (distance – focal))

Without changing our values that we used before, we now know that are rear point is 10.72 feet (3,266.81mm). Take note that the near point is actually closer to you than the subject is, typically the focus is 1/3 in front of the subject and 2/3 behind the subject.

The final step is to calculate the total amount of focal distance. This is one I can even do without a calculator, we simply subtract the far point distance from the near point distance.

TotalDof = FarPoint – NearPoint

Giving our example so far we have a total depth of field of 1.35 feet (411.48mm).

Let’s get practical
Why on earth would you want to know this? The simple answer is you may not, nor may you ever care to know it. When shooting portraits, weddings, events, and pretty much anything else it really isn’t going to matter much. However, if you are the type that wants to set up a shot and have it be EXACTLY what you want, there is simply no other way to know what the camera is going to do. This is important in macro, food, and product photography. By knowing exactly where you focus points begin and end you can more accurately design and execute precise shots.

Ok, how about the easy way?
This is kind of like taking a digital photography class and having to spend a semester cooking your own B&W film, its good to know the theory before taking on the practical application. So how can we do this easier than having to pull a scientific calculator each time you want to set up a shot?

• f/Calc Spreadsheet (download) – This is an Excel spreadsheet that will do all the math for you. This was development by me and is free to use.
• f/Calc Windows and Palm App (website) If you want a simple but powerful Windows or Palm based application, f/Calc does Field of View, Angle of View, Magnification, Spot Meter, f Numbers, Depth of Field and Hyperfocal distance
• PhotoCalc for iPhone (website) – Not only does it do everything for DoF, it also incorporates a sunrise/sunset function, flash exposure calculator, and Exposure Reciprocation calculator.
• CamCalc (Market) Android App for Depth of field, field of view, focal length equivalents, flash calculations, color temp. conversion, miniatures, and sunrise, sunset.
• PhoforPho (Market) Android App with Exposure calculator, Hyperfocal calculator, DoF calculator, Timer, and Exposure compensation calculation for multiple exposures.

I know this has been a doozy of an article to read through just to get to some free or almost free (PhotoCalc is $2.99) tools to make it dead simple to do these calculation. Hopefully this will help you perfect your images help you to use depth of field to its full extent.

• Nikon D3X
• Olympus E-30

This update also includes preliminary support for the recently announced Epson R-D1x (and R-D1xG).

The Lightroom 2.3 update includes several bug fixes.

FIXES originally provided in the Lightroom 2.3 Release Candidate

• In the Windows 64-bit version of Lightroom an sFTP upload process could cause Lightroom to crash.
• Slideshows could return to the first image randomly during playback.
• A memory leak could cause Lightroom to crash while attempting to process files with local adjustments.
• Canon EOS 5D Mk II sRAW files could process with artifacts in Lightroom 2.2.
• Lightroom 2.2 could cause disc burning to fail for Windows customers.

FIXES new to the final version of Lightroom 2.3

• Attempting to undo(CTRL-Z) a single step in Lightroom 2.2 on Windows could cause a series of previous actions to be undone.

Lightroom 2.3 now provides language support for the following additional languages:

• Chinese (Simplified)
• Chinese (Traditional)
• Dutch
• Italian
• Korean
• Portuguese (Brazilian)
• Spanish
• Swedish

Does scaling images have to suck?

The problem with scaling images up is that the software has to examine the image and guess what pixels need to be added to make the image look right and maintain quality, detail, and sharpness. Without a very sophisticated algorithm, you end up with blocky and blurry images when you are done. This is exactly what Genuine Fractals was designed to solve.

Photoshop CS4 vs Genuine Fractals 6

While Photoshop does an ok job at upsizing images, it most certainly does not do a terrific job. Let’s take a look at what Photoshop can do versus what Genuine Fractals can do on a small photo.  The original photo we are going to use is this photo that originally was at 640px wide. Let’s pit Photoshop CS4 vs. Genuine Fractals 6.

The following examples show the difference between the two programs:

Scaled with Photoshop

Scaled with Genuine Fractals

As you can see, the image scaled with Photoshop is much softer, looking out of focus than the one scaled with Genuine Fractals. This is a rather extreme example since we started with a pretty small image to scale up but it does prove the point. My normal use is for scaling screenshots up from 72dpi to 150dpi for use in the books I am writing and it does an awesome job of that.

Using Genuine Fractals

Genuine Fractals is a Photoshop plugin and when activated opens in its own interface with the toolbar on the right Besides just scaling images up or down, it can also add texturing and film grain which can help improve the perception of sharpness.

Another useful feature is a tool to create the data needed for gallery wrap images where the image continues off the edge of the frame and continues along the outside edge.

Key Features of Genuine Fractals 6

Genuine Fractals may seem like a pretty basic program but it does have an impressive list of features as well.

• Resize images up to 1000%
• Maintain sharp edges and minute detail
• Control texture for maximum quality with different image types
• Apply sharpening based on luminosity only
• Add simulated film grain for perceptual sharpening
• Includes document size presets for common photo and paper sizes
• Supports cropping and resizing in one step
• Supports resizing RGB images
• Supports resizing grayscale images
• Supports LAB images
• Supports layered Photoshop files
• Tiling feature – create tiled mosaics
• Batch process multiple files at once
• Supports resizing CMYK images  **
• Gallery Wrap feature – add extended margins for printing on canvas **
• Integrates with Photoshop Lightroom **
• Integrates with Apple Aperture **

** Only availale in the Professional Edition

System Requirements

Windows
Windows XP SP2 or Vista
Microsoft .Net 2.0 Framework or higher

Mac OS X
Mac OS X 10.4.11 or later
Universal Binary – Supports Intel Processors

Common
Photoshop CS2(v9.0.2), CS3, or CS4
Photoshop Elements 4 or later
512MB of RAM
25 MB of disk space
Adobe Flash Player 9
Internet connection for update checking & tutorial movies

Genuine Fractals Demo

In this video, Kerry shows how to use Genuine Fractals to scale up images.

• Nikon D3X
• Olympus E-30

There are several bug fixes in this update :

• In the Windows 64-bit version of Lightroom an sFTP upload process could cause Lightroom to crash
• Slideshows could return to the first image randomly during playback
• A memory leak could cause Lightroom to crash while attempting to process files with local adjustments
• Canon EOS 5D Mk II sRAW files could process with artifacts in Lightroom 2.2
• Lightroom 2.2 could cause disc burning to fail for Windows customers

Additional Languages
Lightroom 2.3 now provides language support for the following additional languages:

• Chinese (Simplified)
• Chinese (Traditional)
• Dutch
• Italian
• Korean
• Portuguese (Brazilian)
• Spanish
• Swedish

The translation effort for these languages is over 90% complete in this release. We appreciate your feedback as we complete this work so that we can ensure that the final release provides a high quality update for all of these new languages. If you find a translation error or problem with these new language versions please report them here: Bug Report Form

Notes on the Additional Languages

• Localized help is not yet available for these additional language versions
• The new language versions cannot be installed simultaneously with the English/French/German 2.3 RC build

Have you ever imported some RAW files and when you first open the image in Lightroom the image is vibrant and looks great and then all of a sudden the image switches to something that is less sharp and the colors are all bland? If you have seen this phenomenon, what you are seeing initially is the embedded JPEG image being displayed first and then the on-screen image changes to the RAW sensor data image. The reason why there is a difference is that the JPEG images have had your camera settings applied to them before being saved. With Canon camera, this is usually Standard, Faithful, Landscape , Neutral, and Portrait. Other camera brands have similar types of basic settings. Many people complained that the JPEG image was often very nice and it took a lot of work to get your RAW images to look as good as the JPEG image.

To solve this, Lightroom needed to have a way to understand what the cameras where doing to the images. Initially, you could use the camera calibration controls to dial in some default settings, but this was really inaccurate and rather a pain to use. Shortly after Lightroom 2.0 came out, Adobe came out with the first beta versions of the camera profiles. These profiles were actually based on the characteristics of the different cameras and can be used to very quickly get your image looking better right from the beginning.

Sometimes the effect is more subtle

For some people who still shoot JPEG instead of RAW, one of the complaints about RAW is that it takes longer to process RAW images to get them look good. Lightroom 2.2 with camera profiles solves this problem quite nicely. You can easily create a camera profile preset (or download ours here) and use them as an import preset so that it is applied to every image as you are importing them. Applying the Standard profile during import will get the vast majority of your images looking almost identical to what you would get from saving the image as a JPEG.

Beta Profiles

If you have installed the beta profiles, you can go ahead and remove them using the following instructions specific to your operating system.

Go to the following folder (based on your operation system) and delete anything with the word “Beta” in it’s title. Then restart Lightroom and all should be good in the world again.

Mac: /Library/Application Support/Adobe/CameraRaw/CameraProfiles
(note: the Library folder for Macintosh HD, not your user account)

Windows 2000 / XP: C:Documents and SettingsAll UsersApplication DataAdobeCameraRawCameraProfiles

Windows Vista: C:ProgramDataAdobeCameraRawCameraProfiles

Video Demo

Adobe Photoshop Lightroom 2.0 Camera Calibration from Kerry Garrison on Vimeo.

Author: Kerry Garrison

What is selective Focus?

We have talked about selective focus here numerous times using depth of field (here) (here) (here) and lenses such as the Lensbaby 3G. Selective focus simply means that the main subject of the image is in sharp focus while the rest of the image is blurred out, this forces the viewer’s eye to the section of the image that we want them to be looking at. This can have a dramatic effect on the image and give it a much more dramatic feel. The problem with simply using aperture settings to control the selective focus is it doesn’t allow you to control the shape, direction, direction, or opacity of the blur effect. With a Lensbaby lens you have more control over the sweet spot of the focus area but you are limited to a round pattern and you don’t have some of the other controls either, and you can’t do a true tilt-shift effect with a Lensbaby lens. With a tilt-shift lens you have more control in the different directions but you still can’t control some of the effect, a tilt-shift lens will also set you back over $1,000. This is where Focal Point comes in. You can use your high quality auto-focus glass to take a great picture, and then add a variety of selective focus effects to the image in post production.

Lensbaby Image

Comparison to using a specialty lens

Before jumping to conclusions, bear in mind that I am a fan of the Lensbaby lenses and I use them at different times to achieve a look that I know how to get in-camera. I have the new Lensbaby Composer and have a review of it coming as well. I know what that lens will do and I use it to create images like the one you can see here. You get a sweet spot where the lens is pointing and then there is a blurring effect that gets more intense the further away from the sweet spot you get. If you are a huge fan of doing things in-camera, then a Lensbaby is a great lens to use. However, the amount of effects that you can get is limited. If you have the time to swap lenses and get the image dialed in, the effect is very cool. If you don’t have a Lensbaby, or if you find later that you have a great shot that would have been even better with that effect, then you are out of luck without a re-shoot. With Focal Point, we can now add the effect in post production and get very similar results.

What can we get with Focal Point?

The best way to see what Focal Point can do is to take a look at several before and after images for comparison.

Original Shot		Focal Point Effect
Original Shot		Focal Point Effect

Using Focal Point

Focal Point installs as a Photoshop plug-in for Photoshop CS3 or CS4. Once launched you can move the “Focus Bug” around to select your sweet spot, and then grab on the handle to adjust the effect. You also have 3D effects that can control the focal plane by holding down the alt key on Windows or the Option key on the Mac and dragging within the focus bug.

Focal Point Plug-In Interface

On the right side of the interface are sliders for fine tuning the effect as well as adding a vignette effect and film grain into the blurred image. Any of the settings can then be saved as a preset for easy access at a later time.

Key Features of Focal Point

While we have mentioned most of them already, let’s take a quick look at the key features of the Focal Point plug-in:

• Focus Bug
  This unique control gives you very simple control over the effects. Just drag and click to move the sweet spot or to adjust the amount of effect.
• Aperture Shape
  While we have only looked at the round shape so far, you can also use a planer shape that simulates narrow depth of field that is often used with food or macro photography or for simulating the miniature effect that you can get with a tilt-shift lens.
• 3D Tilt
  As mentioned, you can adjust the tilt of the sweet spot to create the effect of a tilt-shift or view camera.
• Blur Types
  You can choose from a standard “defocused” look or add a bit of motion to the blur
• Add Layer Mask
  By default (you can turn this off if you want) a new layer is created in Photoshop containing the image with the effect applied. This allows you to change the opacity of the layer or paint out areas that you don’t want affected.
• Vignettes
  Focal Point allows you to add either a dark or light vignette effect to the image with the ability to adjust the amount of the vignette as well as the midpoint.
• Presets
  If you have created an effect that you like and may want to use again, you can save it as a preset within Focal Point so you can easily apply it to another image later.
• Film Grain
  While you may not think you want to add grain to an image, adding the film grain effect to the blurred image will help to maintain a realistic image as well as prevent posterization during printing.

System Requirements

Macintosh

• Mac OS X 10.4.10, 10.5 or Higher
• 1 GHz or faster G5 or Intel Core Processor(s)
• 1GB RAM (2GB+ recommended)
• 25 MB hard disk space for installation
• OpenGL 1.5 Compatible video card with 128MB VRAM at 1024×768 or higher.
• Adobe Photoshop CS2 (9.0.2) CS3 or Elements 4.0.1 and higher.
• Internet Connection & Flash 9 player
• Adobe Acrobat 6 Reader or higher

Windows

• Windows XP SP2, Vista or Higher
• 1 GHz or faster Pentium 4 processor(s) or equivalent
• 1GB RAM (2GB+ recommended)
• 25MB hard disk space for installation
• OpenGL 1.5 Compatible video card with 128MB VRAM at 1024×768 or higher.
• Adobe Photoshop CS2, CS3 or Elements 5 and higher
• Internet Connection & Flash 9 player
• Adobe Acrobat 6 Reader or higher
• Microsoft dotNET Framework 2.0 or higher

Focal Point Demo

Here is a video of Focal Point in action so you can get a feel for how it works.

Focal Point Demo from Kerry Garrison on Vimeo.

Results

Focal Point retails for $159.95 which puts it into the mid-range of prices for lenses from Lensbaby and is significantly cheaper than a tilt-shift lens.  Given that you have more control with Focal Point than you do with any type of lens, its hard to argue the value of Focal Point. There are certainly people like myself who enjoy using specialty lenses as they force you to slow down and really think about the image you are trying to make. Even for me though, there are times when I look at an image and wish I would have broke out the Lensbaby to take the shot and now I can get the effect that I want in post production. The effect that Focal Point creates may not be for everyone but if you shoot weddings, food, macro, still life, or nature shots, then Focal Point can add a new dimension to your images.

Product Review Scorecard

Product Page: http://www.ononesoftware.com/detail.php?prodLine_id=35
Company Page: http://ononesoftware.com

Author: Kerry Garrison

While there are a number of other programs available to do HDR with, we are going to look at the three most common ones mentioned in most posts and blogs, these are:

• Adobe Photoshop CS4 – Merge to HDR Function
• Photomatix
• Enfuse

Photoshop CS4

To be completely fair, I am using the different HDR tools here with their default settings and am not doing any additional tweaking afterwards to make the images look better. That being said, the Photoshop result is certainly the worst of the batch. The dark areas are too dark, the bright areas are too bright and it just didn’t do anything to really impress me. I also cannot find any noticeable difference between Photoshop CS3 and Photoshop CS4 in the final output. Even though you could tweak this image in Photoshop, it would be quit a bit of work because you really need to darken the sky and brighten up the building and parking lot. There may be a particular type of image that Photoshop likes better, of perhaps it doesn’t like that the images covered a 4 stop range. If someone has some tips on working with the Photoshop HDR merge, please post them in the comments.

Photomatix

Photomatix is another commercial tool (http://www.hdrsoft.com) that many people consider to be the best HDR tool available. Comparing the images, the Photomatix output most certainly gave the most dynamic range, so much range that it is actually easy to get an image that doesn’t actually look natural. The way Photomatix works is a complete mystery as even in the overexposed image, you can’t see the detail in the windows and doorways of the building the way you can in this Photomatix output. From a “wow” perspective, it is most certainly the most vivid image and has an amazing amount of range, there is almost nothing in the image that is too bright or too dark. While this may be good for some images, if you are trying to replicate what you are seeing with your eye, this isn’t quite accurate. Is it stunning in it’s range? Absolutely, no question there, it wins hands down in that area.

Enfuse

Enfuse is a different type of tool that compares multiple images and chooses to keep the pixels it feels are the best exposed. Using Enfuse by itself can also be an exercise in frustration. To simply using Enfuse, I use LR/Enfuse from Timothy Armes (http://timothyarmes.com/lrenfuse.php) which integrates into Adobe Photoshop Lightroom. Using just the default settings, the result is an image that is much more natural and is truer to what you would see with your eye. A big advantage of using Enfuse (especially with LR/Enfuse) is that it is significantly faster than Photomatix, the downside is that you don’t get the amazing results that you can get from Photomatix. Enfuse is going to give you a far more natural look.

Summary

It’s not entirely clear if these is a real no-brainer choice between Photomatix and Enfuse as it is really dependant on what you are trying to accomplish with the final image. Photomatix can certainly deliver outstanding images that are virtually impossible to achieve any other way and can also create more natural looking results by toning down the resulting image making it a more versatile tool overall. Enfuse has its advantage in being fast and easy to use when integrated into Lightroom and will create very nice, natural looking results, and if that is your goal then sending a few bucks to Timothy for LR/Enfuse is well worth it. Personally, I have both installed and will choose when to use each tool based on what result I am looking for, and knowing the strengths and weaknesses of each option will make it easier for me to decide when to use which tool.

Author: Kerry Garrison

The plugin we will use is Timothy Armes’ LR2/Mogrify which uses ImageMajick to do things such as:

• Graphic watermarking
• Multiple text annotations
• Multiple borders
• Image resizing
• Adjust saturation and brightness
• Export against an ICC profile file

How much does this amazing plug-in cost? Well, it is free if you want to be limited to only exporting 10 images at a time. If you need to do more, than Timothy will accept any donation that you think is fair.

Installation
First off, we need to download LR2/Mogrify from Timothy Armes site at:

http://timothyarmes.com/lr2mogrify.php

Follow the installation instructions there for either Windows or Mac OSX. I won’t cover the installation since it is only a few simple steps.

Usage
Using LR2/Mogrify is as simple as using Lightroom’s existing Export function as the functions are added into the export utility. The easiest way to get things started is to create a new file in Photoshop with an empty (transparent) background and your logo on other layers. If you don’t have Photoshop, anything that can create a PNG or GIF with a transparent background will work.

From the Library module in Lightroom, select an image or images (up to 10 with the free version) and click on the Export button.

In the Post-Process actions enable the features you want like borders, or Graphical Watermark. In our case we will select the Graphic Watermark, select the file that we want to use, select the bottom left hand corner of the image, and resize the image if needed.

After you configure all the settings you want, click on the Export button to start the process. In a few seconds you have created your first watermarked images.

Here are a few images showing some different watermark styles as well as a multi-line border setup.

Who would have thought that doing advanced watermarking would be this easy? Please consider donating to Timothy for his hard work on bringing us a tool that provides the functionality that should have been included in Lightroom.

Below is a video showing exactly how this works:

Advanced watermarking with Adobe Photoshop Lightroom from Kerry Garrison on Vimeo.

The new versions are:

• Digital Photo Professional 3.5.1
• EOS Utility 2.5.1
• Picture Style Editor 1.4.1
• WFT Utility 3.3
• Canon RAW Codec 1.4

To access the updaters, click here, then select your operating system from the Drivers / Software Selection pulldown menu.

[Via Rob Galbraith]

The Adjustments Panel

Working with adjustment layers has always been a serious tool for hardcore Photoshop geeks, now this has been made much simpler with a new adjustments panel. This can be used to easily adjust Curves, Levels, Hue/Saturation, Vibrance, and more. New On-Image controls allow you to adjust colors in the image without the guesswork of trying to match a complex color. The panel features a wide range of modifiable presets for each type of control and more than 20 preconfigured, customizable starting points are included.

New to the masks is the concept of Density and Feathering to control how much of the mask is used. This is a huge improvement from before where deciding you wanted more or less effect would require constant redrawing of the mask.

Improved Dodge, Burn, and Sponge Tools

If you are a big fan of the dodge, burn, and sponge tools, one of the big issues in the past is that they could sometimes affect the color underneath in odd ways. The new versions of these tools work in a much more natural way and help you to make the adjustments you want while retaining tonal quality.

Improved Image Aligning and Panorama tools

CS3 has some really good photo merge tools and panorama tools, but CS4 takes these tools to all new levels. The improved algorithms improve blending, vignetting, and geometric distortion which results in much better final images. The blending tool can take multiple images of the same shot using different focal points and combine them into a single image with a greater depth of field.

Content Aware Scaling

Ok, this is some wicked cool sh** right here. What happens when you want to scale an image that has people in it? The people can get severly distorted ruining the new image. With content aware scaling, you can size an image and retain the original sizes of key elements like people. Using this you could change a horizontal image to a vertical image and the people or key objects in it will look the same while scaling the remaining parts of the image in a very natural and usually undetectable way.  When you see this in action, you will simply be amazed at what it can do.

Fluid Canvas Rotation

If you use a Wacom tablet or just need to view the world a little differently, you can now easily rotate the canvas around to make it easier to work on a it. Rotating the canvas does not affect the rotation of the actual image, this is simply a tool to make it easier for you to work on images by being able to look at it from different angles.

Smooth Pan/Zom and Flick effects

Some people may think that the new smooth pan/zoom and “flick” effects are just for show, but as you begin to use them you will see how much nicer it is to smoothly zoom in and out of an image and be able to toss the image around as if “flicking” it with your finger. The built-in physics engine makes this new way of dealing with images much more natural.

Bridge

I have always hated Bridge, I’m not afraid to admit it, it was slow, real slow, painfully slow to start up and slow to use. Even on my new quad core system with a nice video card, I still didn’t like Bridge. But get ready you fellow Bridge haters, Bridge is one sweet tool now. Not only is Bridge faster, but it has been improved in a number of areas. There are several new views such as Carousel view which makes working with large numbers of images signifigantly faster. Bridge now also has a PDF-based contact-sheet creator and preview along with web gallery tools. Bridge has certainly grown up and is more integrated into the majority of the CS4 tools besides just Photoshop.

Camera Raw 5

Take the Develop module tools from Lightroom 2.0 and put them all into Camera Raw and you now have Camera Raw 5. And I do mean virtually all of the tools like port-crop vignetting, the gradient filter tool, and the local adjustment brush tool. Unfortunately, Lightroom Develop presets are not available in Camera Raw.

Smarter Smart Objects

Smart Objects were introduced with CS4 and made a huge impact on how you dealt with new objects. With CS4, Smart Objects can now accept perspective transformations.

64 Bit Support (Windows 64 ONLY)

As a HUGE shocker to long time Macintosh users, the advantage this year goes to 64 bit Windows systems. Apple changed a bunch of things without telling Adobe and thus Adobe had to pull 64 bit support out of the Macintosh version. Are Mac users going to have to switch to Vista 64? Not really, only the heaviest of users is going to see much of a performance difference according to sources at Adobe.

Live Preview for Clone Stamp and Healing Brushes

As cool as the cloning tool and healing brushes are, the results have always been somewhat black magic, you just never really knew what you werew going to get. The new versions of these tools provide a live preview for easier and more precise cloning and healing results.

Availability and pricing
Adobe Photoshop CS4 Extended is now available in North America for an estimated street price of US$999. Adobe Photoshop CS4 will be available for an estimated street price of US$699. Both can be obtained directly from Adobe or through Adobe Authorized Resellers.

To order directly from Adobe, visit the Adobe Store at www.adobe.com or call
1-800-833-6687.

Licensed owners of Photoshop CS3 Extended, Photoshop CS2, or Photoshop CS can upgrade to Photoshop CS4 Extended for US$349.

Licensed owners of Photoshop CS3, Photoshop CS2, or Photoshop CS can upgrade to Adobe Photoshop CS4 for US$199.
Licensed owners of Photoshop 5 or 6 can upgrade to Photoshop CS4 Extended for $899 or Photoshop CS4 for $599.
Licensed owners of Photoshop CS3 Extended, Photoshop CS3, Photoshop CS2, or Photoshop CS are also eligible for special upgrade pricing to certain editions of Adobe Creative Suite 4.

New plug-in for Photoshop® and Aperture™ incorporates
U Point® technology for precise selective sharpening

Las Vegas, NV — September 4, 2008 (Photoshop World, Booth #321) — Nik Software today announced the latest version of its popular Sharpener Pro photographic plug-in for use with Adobe® Photoshop® and Apple® Aperture™. Designed for professionals and photo enthusiasts, Sharpener Pro 3.0 is the most advanced and powerful sharpening solution for photographers, eliminating the guesswork typically required for achieving superior and consistent results.

Now featuring Nik Software’s patented U Point technology, Sharpener Pro 3.0 enables photographers to selectively sharpen objects within their images. U Point powered Control Points are easy to use and offer precise control over sharpening intensity without the need to create complicated selections and layer masks.

“Sharpener Pro 3.0 has been dramatically improved with a range of new features, including powerful creative sharpening tools, a soft proofing option, and integrated U Point technology,” said Michael J. Slater president and CEO of Nik Software. “This new version of Sharpener Pro offers the most comprehensive tools for optimally sharpening images for any output device while also offering photographers the complete control they expect,” Slater concluded.

Key Features

• New U Point Powered Control Points—Enables precise, selective sharpening control
• Updated Output Sharpening—Provides the ultimate control to create perfectly sharpened images on all devices and media types such as display, inkjet, continuous tone, half tone, and hybrid tone
• New Creative Sharpening—Enhances fine details and textures with new structure, focus, and local contrast tools for drawing attention to desired areas within the image
• New Industry-First Sharpening Soft Proof—Allows detailed inspection of sharpening results on screen before printing, eliminating costly test prints
• New Output Presets—Enables custom settings to be saved for consistent, professional results
• Updated RAW Presharpener—Retains and enhances sharp details within images without amplifying noise and other artifacts
• Updated Powerful Selective Tool (Photoshop only)—Enables the use of Photoshop’s brush tools to paint in sharpening selectively
• New Smart Filter Support (Photoshop only)—Provides compatibility with Adobe Photoshop’s Smart Objects enabling adjustments to sharpening after Sharpener Pro has been applied
• New Multi-Image Support (Aperture only)—Provides compatibility with Aperture’s multi-image support, allowing photographers to easily copy and paste settings between images to maintain consistency

Pricing and Availability

Sharpener Pro 3.0 will be available in September for electronic delivery directly from Nik Software (www.niksoftware.com) in four languages (English, French, German, and Spanish) and will be available through specialty camera retailers in October of 2008. A complete list of resellers may be found at www.niksoftware.com/resellers.

The suggested retail price of Sharpener Pro 3.0 is $199.95. Upgrades from any previous version are available for $99.95. Sharpener Pro 3.0 installs as a plug-in for either Adobe Photoshop or Apple Aperture 2.1 and is available for Windows and Macintosh operating systems, including Vista and Leopard. For more information about Sharpener Pro 3.0, including video tutorials showing the software running within Photoshop and Aperture and a free 15-day fully functional trial version, please visit www.niksoftware.com/sharpenerpro.

About Nik Software

Nik Software, Inc. is a privately held company that develops software solutions for the growing digital imaging and photography markets. Established in 1995, Nik Software has become the recognized leader in digital photographic filter development and produces award-winning technology and software products for digital photography and imaging professionals including U Point® technology (www.upoint.com), Dfine®, Viveza™, Color Efex Pro™, Silver Efex Pro™, and Sharpener Pro™ software.

I have been a fan of Wolverine products for almost four years now and my trusty Wolverine FlashPac was in need of an upgrade. Not that the FlashPac didn’t do it’s job, its just that it was pretty slow and didn’t have a display that could be used to view the images. Without hesitation I turned back to Wolverine to see what they had available and I found the new ESP Digital Photo Album and Multimedia Player. While the full name may be a bit long, it does convey a lot more of the ESP’s features as well as being a card reader, external hard drive, and FM radio.

Overview
The ESP is an incredible multimedia device that can handle most all of your portable multimedia needs from listening to MP3′s, watching videos, playing a photo slideshow, or listening to FM radio. While many people will love all of those features, from a photographers point of view the most important things to me are the ability to do backups of my compact flash cards in the field, review the pictures on the device, and to have a portable device to show potential clients a slideshow of my work. The ESP does all of these tasks quite well and at a price that won’t make you wonder why you didn’t just buy a nice laptop instead.

Top view of the ESP

Features
As already mentioned the ESP has a multi-function card reader that can either make backups to the internal hard drive of the ESP or when connected to your computer’s USB port your cards will appear of drives that you can access directly.

• Store and View Thousands of Photos

• • Download images directly from any digital camera without a computer
  • Use it to backup and carry all your digital images
  • Display JPEG, Bitmap, Tiff, Text and RAW images (most popular SLR Cameras)
  • Print directly to printers

• Store and Play Thousands of Songs

• • Supports five music Formats: MP3, WMA, OGG, WAV, AAC (MP4-audio) & CDA
  • Easy, drag and drop music files from your computer and play them instantly

• Store and Play Hundreds of Hours of Video

• • Supports: MPEG-1, MPEG-4, WMV9 and Xvid

• Built-in FM Radio

• • Listen and RECORD your favorite talk shows or music from any FM Radio Station
  • Scan and preset up to 18 different Radio Stations

• Plugs to TV and Stereo System

• • With the included Video/Audio cable connect the ESP directly to any TV or Projector
  • View a slide show of your favorite photos or watch recorded videos on the big screen
  • Connect to a stereo system to enjoy and share your music collection

Setup
The setup of the ESP is quite simple, it comes with both an AC adapter and a USB cable, be sure and plug it in until fully charged before using it the first time, after that the simple to navigate menu system walks you through everything you need to know.

“The ESP was a lifesaver for us at a fashion shoot when the assistant left the CF cards back in the car. With the ESP we would fill up a card, tell everyone to take a five minute break, dump the cards to the ESP and get right back to shooting.” – David , Esquire Photography

ESP Controls

Usage
The ESP’s operating system is very simple to use and works the way I would expect it to, when I insert a card it pops up and asks me what I want to do with it, I select backup and it just starts working. The main controls consist of the “joystick”, a menu button, and the ESC button.

Using just these three simple controls you can manage everything on the system. The “-” and “+” buttons control volume. The only other control is the power button on the right side as well as a lock control to keep the power from coming on accidentally.

At the bottom you can see a small mic port for doing audio notes and near the top are the LED indicator lights.

The has an optional docking station that can also be used for capturing video and audio from remote devices. Since I don’t have a use for that right now I didn’t get one yet to see how that works.

ESP Menu System

The menu system is an icon driven system with easy-to-read captions to help you navigate. Pushing left/right or up/down on the directional pad will move you from application to application and then pushing in will select the item. The Menu key will give you a list of available options from wherever you are while the ESC key will back you out one step at a time.

The main thing to keep in mind is that images that are backed up from a memory card are found in the Backup application instead of the Pictures application. You have to specifically copy images into the Pictures folder for them to be viewed there. This is a great way of having a photo slideshow of images without getting confused as to what images are from your current photo shoot.

What I actually like to do is to backup my images to the ESP and then if I have time, review them for focus issues or just for being a bad image, I can delete them right from the ESP and save time later when importing the images into my computer.

ESP playing video

For client meetings, I also created a couple of really nice slideshows using Proshow Gold and output them formatted properly for the ESP. Let me tell you, the image shown here does not do the ESP justice, the screen may only be 320×240 but the slideshows and pictures look fantastic on it. So far, everyone that has seen the slideshow videos on the ESP have been very impressed.

The ESP has a bunch of other features that I could spend a few more pages writing about but they really don’t have much appeal to me, these include the mp3 player, the FM radio, the audio recorder, and the Tetris-like game that is included. While those are nice add-ons, they really aren’t the main reason a photographer is going to want the ESP.

Tested Transfer Speeds (1gb of data)

Reader to Computer    3:31 minutes
Reader to ESP    3:43 minutes
ESP to Computer    1:44 minutes

Why the ESP?
Why would I choose the Wolverine ESP over the Epson P-5000? The simple answer is a cost/benefit analysis blows the Epson out of the running. For almost twice the price of the Wolverine ESP, the Epson P-5000 offers basically a nicer screen. When the folks at Wolverine decided to make a new device, they interviewed tons of photographers and asked them what they would like to see that would compete against the Epson units and the top answer was that they wanted a much more affordable device even if it meant having a lower resolution LCD display.  If I am going to spend $800 for a portable media device, its going to be a new laptop, not a small box I throw into my camera bag and use mostly as an external drive and card reader. Coming in at $329, the ESP is much more affordable and does it’s job exceptionally well. It’s a nice upgrade from my old FlashPac in terms of functions and download speeds which is a nice bonus as well.

What’s in the box
In the box you will find the ESP unit itself along with the nice quality carrying case along with the user documentation and CD, AC charger, USB cable, Audio/Video cable (to connect to TV), and Earphone.

Summary
The Wolverine ESP competes nicely against other units offering similar features and at a price that doesn’t give you sticker shock. The base features do exactly what they are supposed to do while there are enough extras to add even more value to the package. I don’t leave for a shoot without my ESP in my bag and often will be making my backups of my cards on the drive home. With my old Flashpac I would have to be quite far away to actually finish a large backup on the drive home but now it takes a fraction of the time.

Final results:

Website: Wolverine Data
Author: Kerry Garrison

Overview
dpMagic installs into Windows operating systems in order to provide thumbnails or supported RAW image files. The new 2.0 version adds:

• Support for over 360 cameras
• New functionality, such as printing, exposure warning
• Improved look and feel
• Improved performance

In previous versions you could view larger versions of your images in a viewer that was similar the Windows Picture Viewer but the new 2.0 version has a new image viewer that is much more professional and allows you to view the histogram and EXIF data.

The new viewer also allows you to see over and under exposed warnings, view a slide show of images, delete images, and print selected images. This was certainly a step up from the more clunky image viewer from before.

dpMagic Plus 2.0 sells for $24.95 and I would expect an updated version of the MiniLab which has more features to be available soon.

If you use RAW from virtually any camera, you should certainly check out dpMagic to help speed up your workflow and asset management. Given the price, it is one of the least expensive pieces of software you will buy and once you have it you will wonder why the functionality wasn’t simply built into Windows in the first place.

I can’t recommend dpMagic Plus enough. It is a killer app that any serious photographer shouldn’t be without. The fact that I have been using the previous versions for several years and have recommended it to pretty much everyone I know should tell you that I really think this is a valuable product.

Site: http://dpmagic.com