The Math
Feel free to skip right over this part, this is the boring part, it’s so boring I thought of putting a picture of an artistic nude shot next to it just to keep people awake. Ok, so here we go. Before you can calculate the depth of field you first must know the circle of confusion for your camera.

Don’t get too lost on me yet, for most of us digital SLR users this is  one of two numbers. For most of us with APS/APS-C sized sensors this number is 0.019948, for full frame sensors (the big Pro cameras) and 35mm film the number is 0.02501. This represents the sensor size. Again, don’t get all lost on me yet, just remember the number for your particular camera.

The first thing we need to calculate is the Hyperfocal distance, for this calculation you will need to know the focal length of your lens. the aperture you are using and the CoC (circle of confusion) for your camera.

The math to calculate the hyperfocal distance is as follows:

HyperFocal = (FocalLength * FocalLength) / (Aperture * CoC)

Thus, the Hyperfocal distance of a 50mm lens at f/2.8 on an APS sensor (Canon 30D in my case) is 146.85 feet.

Next we need to calculate the near point which is the closest distance that will be in focus given the distance bdetween the camera and the subject. The math here (yes, it gets SO much worse) is as follows:

NearPoint = (HyperFocal * distance) / (HyperFocal + (distance – focal))

This is somewhat  complicated because the focal length is in millimeters and those of us in the US are better with feet and inches still so if you want the end value to be in feet you have to do some more conversions. If we are using the same 50mm lens, at f/2.8 on an APS sensor at a distance of 10 feet (3048mm) then our HyperFocal distance is 146.85 feet (44,749.23mm), giving us a near focus point of 9.37 feet (2,856.66mm). Are we following along still? Did I lose anyone?

Alrighty then, let’s now calculate the far point distance, this is almost the same as before but using slightly different math, so here we go.

FarPoint = (HyperFocal * distance) / (HyperFocal – (distance – focal))

Without changing our values that we used before, we now know that are rear point is 10.72 feet (3,266.81mm). Take note that the near point is actually closer to you than the subject is, typically the focus is 1/3 in front of the subject and 2/3 behind the subject.

The final step is to calculate the total amount of focal distance. This is one I can even do without a calculator, we simply subtract the far point distance from the near point distance.

TotalDof = FarPoint – NearPoint

Giving our example so far we have a total depth of field of 1.35 feet (411.48mm).

Let’s get practical
Why on earth would you want to know this? The simple answer is you may not, nor may you ever care to know it. When shooting portraits, weddings, events, and pretty much anything else it really isn’t going to matter much. However, if you are the type that wants to set up a shot and have it be EXACTLY what you want, there is simply no other way to know what the camera is going to do. This is important in macro, food, and product photography. By knowing exactly where you focus points begin and end you can more accurately design and execute precise shots.

Ok, how about the easy way?
This is kind of like taking a digital photography class and having to spend a semester cooking your own B&W film, its good to know the theory before taking on the practical application. So how can we do this easier than having to pull a scientific calculator each time you want to set up a shot?

• f/Calc Spreadsheet (download) – This is an Excel spreadsheet that will do all the math for you. This was development by me and is free to use.
• f/Calc Windows and Palm App (website) If you want a simple but powerful Windows or Palm based application, f/Calc does Field of View, Angle of View, Magnification, Spot Meter, f Numbers, Depth of Field and Hyperfocal distance
• PhotoCalc for iPhone (website) – Not only does it do everything for DoF, it also incorporates a sunrise/sunset function, flash exposure calculator, and Exposure Reciprocation calculator.
• CamCalc (Market) Android App for Depth of field, field of view, focal length equivalents, flash calculations, color temp. conversion, miniatures, and sunrise, sunset.
• PhoforPho (Market) Android App with Exposure calculator, Hyperfocal calculator, DoF calculator, Timer, and Exposure compensation calculation for multiple exposures.

I know this has been a doozy of an article to read through just to get to some free or almost free (PhotoCalc is $2.99) tools to make it dead simple to do these calculation. Hopefully this will help you perfect your images help you to use depth of field to its full extent.

Getting Started
Most cameras, including newer point and shoot cameras will let you shoot in full manual mode. The problem with going manual is that if you don’t have your settings “just right” you can end up with an image that is too dark or too light. Without a basic understanding of the different settings, it can be difficult to get a good shot. However, with a basic understanding of the three variables even the most newbie photographer can learn to take better pictures by getting away from the automatic settings.

ISO Speed
The ISO speed is equivalent to the ISO speed we used to use on film cameras, this describes the light sensitivity of the film that is being used. The higher the ISO speed, the more light the sensor can pick up. For example, if your camera is set to ISO 800 you can take a well exposed image in a darker room than you could with ISO 100. By definition you would always want to run your camera in the highest ISO speed possible. While this may sound like a good idea, the downside is that the higher the ISO speed, the more “noise” will be introduced to the image, thus degrading the image quality. In most cases, you will get excellent results by using ISO 200-400 outdoors and 400-800 indoors. This does not take into account your camera model as some cameras do better than others at the higher ISO settings.

Shutter Speed

Medium Shutter Speed to Show Movement

The shutter speed is one of the easiest settings to understand as it simply means how fast the shutter opens and closes when you press the shutter button. The faster the shutter speed the better the camera will freeze the action of an event. This setting is represented in seconds, a fast shutter speed would be something like 1/2000^th of a second. A long shutter speed such as 1/30^th of a second or slower can result in blurry images if you don’t use a tripod. Like the other settings, the shutter speed also affects the amount of light that hits the sensor. The faster the shutter speed, the less light that comes into the camera. So while a fast shutter speed can freeze action, you need more and more light in order to prevent getting a dark picture the faster you set the shutter. When you cant get a bright enough image, you will need to slow down the shutter speed. In some cases you may want to get a motion blur such as a waterfall or freeway traffic, these shots require a very long shutter speed.

Shallow Depth of Field

Aperture
Understanding aperture is probably the most difficult setting for most people to grasp, because of this we wrote an entire article about it. The aperture is an adjustable opening in the lens that controls the amount of light that can enter the camera. The aperture setting is expressed in f stops with the largest opening having a smaller number so a wide open aperture is going to have an f-stop of around f/1.4. The aperture setting can have a big effect on the depth of field which allows one part of the image to be in focus and the rest of it being blurry which helps to highlight the subject of the photograph.

Starting Points
Without having a light meter or lots of experience how do you know what settings to start with? The way I learned was to set my ISO to what I wanted, typically 200-400 ISO outdoors and 400-800 ISO indoors, and put the camera in P mode and press the shutter half way down. Inside the viewfinder the camera will show the settings it will use to take the picture. Then you can put the camera into Manual mode and adjust the settings to match. After some practice you should be able to set some basic settings fairly close to what they need to be, then, by pressing the shutter half way down the camera will autofocus and then take a meter reading which should show in the viewfinder or on a display depending on your camera. Then you can adjust shutter speed or aperture to change the exposure to get it where you need.

Using the Histogram
If your camera will display a histogram after shooting an image, then you need to take advantage of this feature. By looking at the histogram of an image you can quickly tell if the image was properly exposed or not. With a digital SLR camera you want the histogram to be a nice curve with the curve being just to the right of center like our example one here. This is actually saying that the image is just slightly overexposed. With film, if you overexposed the image, you would lose detail so it was better to slightly underexpose. With digital, shadows will lose detail so it is better to slightly overexpose.

Practice Practice Practice
There is nothing that will beat getting out and getting behind the camera and learning how to use it well. If you plan on making photography a serious hobby or more, you will need to learn how to use manual mode for those times when the automatic or program mode settings just won’t cut it or for when you want to create an effect that you just can’t get any other way.

Get out and practice and be sure to post some comments and post some pictures to our Flickr group.

Here is this today’s episode featuring me as the guest.

I think screen protectors are way overpriced.  You can pay $10 to $15 for a piece of plastic film smaller than the palm of your hand.  That just doesn’t seem right.  Fortunately, I happen to have a box full of old Palm Pilot screen protectors laying around and I usually just cut one of them to the size of my camera’s screens.  They are durable, scratch resistant and provide decent protection.  I bought several dozen of these in a single ebay auction, so I didn’t feel ripped off at paying $14.99 for a clear piece of sticky plastic, as many companies charge for their “custom cut” screen protectors.

Overview

While at the PMA tradeshow in March ’08, I met with a Giottos distributor named Bill Hodges, who was very enthusiastic about their products.  Bill showed me an product line that I was not familiar with in the Giottos lineup… the AEGIS Pro Optical Glass Screen Protectors.  Unlike the simple plastic films you can buy for $10 to $15, these Giottos screen protectors are $24 to $45.  Now, I have never been comfortable paying $15 for a piece of plastic film smaller than a playing card, so what could possibly make me spend two to three times that amount to protect my camera screens?

To answer that question, let’s look at some specs on this product.

AEGIS SP 80 series
• Transmission 420~680 nm: T≥98%
• High translucent, optical glass sheet made from Schott glass in Germany.
• Both sides 12 layers coated, from “LEYBOLD” Germany
• 12 Layers improve LCD backlight transmission while reducing reflections or glare
• Elite Schott glass protects and clarifies LCD images
• Includes Micro-Fiber Cleaning Cloth
• Available for digital cameras and DSLR’s including Canon, Nikon and Fujifilm
• Adds no significant weight or bulk to the camera body
• Resistant to acid and alkali prolonging the life of the LCD
• Easily applied using pre attached 3m double sided tape
• No air bubbles
• Glass surface reaches 8-9 and the elastic pressure is 4kg/cm2 to help it withstand impacts
• Removable and replaceable if it gets scratched or damaged

I have found that most LCD screen protectors fall into one of two categories; the plastic stick-on film sheet or the flip-up sun shade housings.  Stick-on sheets are prone to peeling off, bubbling, and have little to no beneficial optical qualities while LCD hoods/screen shades & covers are bulky and cumbersome while only minimally preserving the LCD image.

Setup

The Giottos AEGIS Glass Screen Protectors are very different from the start. The package has an interesting pull-up transparent tab that has the outline size of the screen protector that you can lay over your camera screen to confirm the size. With 12 layers of Anti-Reflective coating, plus being made of glass, they protect the LCD panel from not only abrasions and scratches , but impact too.  The multi-layer coating supposedly improves clarity and color quality as well as the life of the LCD.

I picked up two of these screen protectors; one for my Canon 5D Mark II and one for my Canon G9.  The two models I picked up were obviously different as the screen sizes of the displays on the two cameras are just a little different.  So, I started with the SP8301L for the 50D and 5D Mark II.

So, enough of all the marketing hype… what is the user experience?  What is this thing really like?  Well, first, the application to the camera screen was fairly simple.   Since it is rigid, it is easy to move around and pre-position.  There were no air bubbles to worry about, but not just because you are applying a rigid piece of glass, but because the glass is actually suspended above the screen surface by a fraction of a millimeter.  The only sticky surface is around the edges of the protector, and the thickness of the sticky substrate suspends the glass above the screen.

Installation

There is protective plastic on both sides of the glass sheet.  I cleaned my screen well with a micro-fiber cloth, peeled away the bottom film first, then lined the glass up with the screen.  My first shot was not perfect, so I used a fingernail to peel it up and re-apllying it.  Not too challenging.  Once in place, I rubbed it down with a cloth and peeled away the top protective layer.  The fit to the 5D II is perfect.

Usage

Checking at the final result, it looks great.  The protective cover has the Giottos logo in the black trim around the outside edge which covers the Canon logo.  This is the most visible thing you will notice every day  But as you can see by the photo it simply looks like part of the camera.  The surface of the Schott Glass is a little more reflective than the anti-reflective coating on the original screen surface, but you only notice this when the camera screen is off. Once it is on, the picture is bright and clear.  I actually find it much easier to see in bright sunlight than it was before the Giottos screen cover was on.

One More Time

Next, I installed my second screen protector over my Canon G9 screen – model SP 8300.  This was a little tougher as the screen fit was not as perfect as the one for the 5D Mark II.  The cover for the G9 was actually a couple on millimeters shorter on the vertical dimension than the Canon G9 screen.  This caused me to lift and re-seat the cover a couple of times to get it to where I could best see the camera’s screen through the glass.  Now, the end result is absolutely fine and the screen is 100% visible, but the Canon logo at the top is only partially covered.  This is a very small detail, as I guess I was expecting absolute perfection here.  However, I am completely happy with the end product.  With the small body of a camera like the G9, you tend to touch the screen more and it seems more prone to being bumped or scuffed by being laid on the screen, so I think this application is even more crucial than putting it on my pro body.

Protector in place	Removing film cover
With Protector Installed

Results

I have now tested both of my cameras outside in sunlight, in the shade, in the dark, in about every possible situation.  I have to say that I have no real complaints at all.  About the only criticism one might have is that the new screen is a bit more reflective than the original surface, but it isn’t bothering me.  After reading some reviews online, I see that there are various complaints about size, reflectivity and the screen not sticking.  I have to say that I do not see any of these issues with my two experiences.

Summary

The only reason to really put a protector of this sort over your camera’s screen is to protect the original screen and protect the value of your camera.  Let’s face it… these cameras are electronics.  In today’s market, electronics are the fastest depreciating item you can buy (outside of a home – but that’s another story).  To keep the value of your camera, you need to keep it looking new.  But you don’t want to have to look through some bubbled, misty looking piece of plastic film the whole time you use your camera.  So, is it worth a little more to invest in a quality piece of glass like this?  I think so.

From Scarlett:
“I had so much fun last year shooting a sizzlin’ bride and groom session in the glamorous lights of Vegas with Ross of Flosites.com and his bride Leysa, and this year, I want to give you the same opportunity for some rockstar portfolio pieces too! For those attending WPPI this year, I’m hosting a stylish photoshoot in Vegas again. Lyndsay, who won my “I Want to Spend A Day With Scarlett” contest will be the model with her hot husband as we shoot around the city that never sleeps! ”

To join in on the photoshoot, the session fee is $199 and we’ll shoot on Monday, February 16 at 7pm. To sign up, send Scarlett an email at scarlett@scarlettlillian.com! This a FIRST COME, FIRST SERVE event, and WILL sell out, so by emailing, you are agreeing to reserve your spot by paying the registration fee!

One of the sponsors, Pocket Wizard, will be at the workshop filming an exclusive BEHIND THE SCENES video of Scarlett and all of you participating in the workshop! So bring your inner rock star and get ready to be on camera! Seriously, you won’t want to miss this!

One lucky winner will get a chance to win a FREE spot in the workshop, so let’s do another CONTEST! The winner will ALSO win a pair of Pocket Wizards, AND the 1st, 2nd, & 3rd place winners will all win a Trendy Camera Strap, and Camera Dojo Powertools & Dojo Wedding Tools Lightroom presets! Woo hoo!!

You guys got so creative with the “I Want To Spend A Day A With Scarlett” contest, but this time, let’s call it, “I Want To Shoot With Scarlett in Vegas!”

THE RULES:

1. You have to be in the pic. You are welcome to have others in the picture as well!
2. The pic has to say somewhere “I Want to Shoot With Scarlett In Vegas” whether holding a sign or photoshopped or whatever.
3. Get creative as you want, and try to tie in something Vegas into it! You can dress up like Elvis, or reenact Britney’s quickie Vegas wedding, or show me your winning hand at poker, or whatever you want!
4. Once voting is opened up, you will want to blog/Facebook/Twitter about your contest entry and direct people to come vote for you here on my blog!

Because WPPI is quickly approaching, the DEADLINE for contest entries is next Monday, February 2 when the Finale of my video blog premieres!! Then we’ll have my blog readers vote on the winning photo to award the winner! There is limited availability for the workshop to keep the group intimate for learning and getting the best shots, so for those interested, go ahead and sign up now, and if you win, I’ll refund your session fee!

Thanks to these amazing sponsors! Check them out!!!

Trendy Camera Straps (Scarlett will be hanging out at their booth, more details later on how you can come say hi!)
Pocket Wizard
Camera Dojo
Modern Photographers

• R-Strap Camera Strap Courtesy of BlackRapid
• Fast Track Photographer Audiobook courtesy of Esquire Photography
• Dojo Wedding Tools Presets for Lightroom
• Dojo Power Tools Presets for Lightroom

All together this is about a $200 prize package.

Example from Roberto Valenzuela

Example of Converging Lines from Roberto Valenzuela

Contest Rules

Please get this right so you do not get disqualified. To enter your image into the contest, upload it to your Flickr account. You will need to be a member of the Camera Dojo Flickr Group and then you can add your image to the Group photo pool. You must tag your image with the words Contest and Lines. This will allow me to find them easily.

You must only upload images that you took yourself. We will post the winner’s pictures on CameraDojo.com but you will retain all copyright to the image. We suggest you have a watermark on your images as well. The deadline for entries is Feb 28th 2009 and the winner will be named on the following podcast.

Here are a few other examples:

Current Entries

1. Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera’s LCD data panel may shows Battery will be exhausted soon or Battery must be recharged, even though the battery capacity is sufficient.
2. Fixes a malfunction that in rare occurrence causes an Err 06 Self Cleaning Sensor malfunction to appear on the camera’s LCD monitor and LCD data panel, even when the Self Cleaning Sensor Unit is operating normally. This message may appear depending on the timing of when the camera is switch to the ON position.
3. Fixes a malfunction that prevents correct colors from being printed when direct printing. RAW images captured using the camera’s custom Picture Styles (Emerald, etc.), which have been downloaded from Canon’s Web site and registered under User Def. 2 or User Def. 3.
4. Modifies the level of subject brightness that causes the AF-assist beam to fire when using an external Speedlite.
5. Enables an external flash connected to the camera’s synchro terminal to fire even when the camera’s built-in flash is popped up.

Source: http://web.canon.jp/imaging/eosd/eos40d/eos40d-firmware-e.html

What is a RAW image?

By RAW, I mean an image that is shot with your camera image quality set to RAW mode which stores the actual sensor data for the scene that was shot. This is different than a JPEG image that is a rendered image of the RAW data that has different effects applied to it by the camera such as sharpening, saturation, and contrast. A good quality JPEG image can look incredibly good and can be printed at large sizes and will look great. A RAW image will need some form of software program to convert the RAW data to something usable. The most popular programs for this today are Lightroom, Photoshop, Aperture, Capture One (Nikon), and Digital Photo Professional (Canon).

Is there a technical difference?

Anyone that tries to tell you there is no difference in image quality between a RAW image and a JPEG is simply mistaken or ill-informed. From a purely technical perspective, a RAW image will always give you a better image. A RAW image simply has more data, for each pixel there is at least twice as much data on older cameras like my 30D and as much as eight times as much data with newer cameras that have more bit depth. This means that a RAW image has the ability to have a greater tonal range than a JPEG. A RAW image will also then have greater latitude than a JPEG image, giving you the ability to process the image to recover shadows and highlights more than you can if you started with the JPEG. Since white balance settings are applied when an image is saved as a JPEG, shooting in RAW will allow you to adjust the white balance during post processing without sacrificing any image data.

This is not an opinion, it is a pure technical fact. So let’s accept that this is true and that RAW has a distinct technical advantage over a JPEG saved from the camera. I don’t think we need to debate that RAW has an inherent technical advantage and I think some people get caught up in this. I think the real issue is whether or not you need the advantages of RAW versus the negative reasons for using RAW that we will look at later.

Getting down with the downside of RAW

The big debate over RAW vs JPEG is whether or not the pros outweigh the cons so let’s look at the cons and see what the downside of using RAW images is:

• Increased file size
  This is probably the biggest issue there is. RAW images are considerably larger files than their corresponding JPEG images. With my 30D, a RAW file will typically be around 5mb while a fine quality JPEG will be around 1.5mb. As the megapixel count goes up, the files get downright huge with RAW images from a new Canon 5D MkII being around 22mb each. If you are shooting lots of images, at a wedding for example, then the larger size of RAW files will be a significant hit. Since the files are larger, they will require more horsepower from your computer to process. For the same number of images, you will need more flash card storage.
• Specialized software needed to process
  If you can call Photoshop, Lightroom, or Aperture specialized software, then yes, you will need something like this or use the software that came with your camera. If you use something other than these programs then you may have issues dealing with RAW files. For a brand new camera, you may have to wait for updated versions of these programs before they can recognize your files. This also means that if your camera is discontinued in the future, there is no guarantee that your camera’s format will always be supported (this is a good reason to use DNG files, but that’s for another article).
• RAW workflow is different than a JPEG workflow
  Is it? If you are already using Aperture, Lightroom, or Adobe Bridge for processing JPEG’s, then there is little to no change in your workflow. Two years ago, before tools like Lightroom and Aperture, working with RAW images was such a pain that RAW was said to mean “really awful workflow”. Since many of us are using Lightroom and Aperture now, there is little to no changes at all for working with RAW files other than they take longer per image to download off a CF card.
• RAW images in third party tools don’t look as good as the JPEGs
  This has been a real serious problem for a while as only the camera manufacturers really have the secret sauce for decoding their RAW images properly. Adobe has pretty much solved this issue with Lightroom 2.2 and the inclusion of camera profiles that setup the RAW processor to match the settings used to create the JPEG images in your camera.

Again, we are looking at facts here and not opinions, but it is important to understand that there is a downside to using RAW files even if I personally feel that the negatives are typically blown a bit out of proportion with the exception of the increased file size which can be a really significant issue for heavy shooters.

The non-destructive workflow

One of the biggest advantages of shooting RAW is that it inherently provides you today with a non-destructive workflow. What it means is that there is no image degradation between saves and any given step in the editing process can be removed. If we are using any of the three most popular tools today (Photoshop, Aperture, or Lightroom) then when we edit a JPEG, and make our changes, those changes are permenant, and because we just re-saved our image as a JPEG some compression has occured, every time we do this we lose some image quality. Sure you can make multiple copies along the way so you can go back to previous versions, but that negates the whole point of JPEG’s saving disk space. I personally work in Lightroom and I can take my RAW images and apply as many edits to them as I want but these changes are simply stored as a set of instructions to Lightroom, thus the original image is never modified. This also allows me to make virtual copies of an image so I can have a color, B&W, Sepia, or dozens of different versions of an image and take up only a trivial amount of disk space since it is only storing the steps to make the changes and isnt storing a new copy of the image itself and again, no matter what I do, there is no image quality lost at all during the post-production process.

Is anyone still using JPEG these days?

If nobody was shooting JPEG anymore than I wouldn’t have so many questions about it but are any real professionals shooting JPEG and the answer is yes.

Carlos Baez is a wedding photographer from Florida, this is someone who makes his living delivering top quality images to high paying clients and yet Carlos shoots JPEG because he can consistently deliver great images without the extra overhead of RAW files. Carlos is an expert at lighting and understanding exposure so he doesn’t rely on post processing to get his images right.

Ken Rockwell is a huge advocate for shooting in JPEG mostly because a lot of people use it as an excuse to not get the image right in camera. Although he has an article about this (http://www.kenrockwell.com/tech/raw.htm). I have posted a link to his article because he does make a few valid points but I think he does go over the top a little on some of the negatives while I do agree that many people use RAW without either knowing why or using it to correct their mistakes from not knowing how to use their camera properly.

Pros against JPEG

It’s only fair that I point out a few pros who have made the switch to RAW and some of their reasons for doing so.

Scarlett Lillian from Florida has been shooting RAW since she started shooting weddings but then tried going to JPEF to save disk and CF card space. After really giving it a try, she finally switched back to RAW because she felt she just wasn’t getting the color and skin tones from the JPEG files that she was when she was using RAW. She uses Photoshop with Bridge as her workflow tool.

David Ziser is, without a doubt, one of the biggest names in wedding photography and recent convert to the RAW side. David’s big switch came when he started using Lightroom for his workflow and then discovered that the images he was getting with Lightroom and RAW files simply gave him a better image than starting with JPEG. David details his experience in a post on his site, although he also make a case for use JPEG for less critical shots that will never be printed at larger than 5×7. Anything destined for the album or enlargements he suggests shooting in RAW and the filler shots can safely be shot in JPEG to conserve space.

Rick Miller who is a Senior Solutions Engineer at Adobe does a segment when he is demoing Lightroom where he shows a picture of his girlfriends dog that is a white curly haired dog. Rick took a picture of the dog that when the rest of the scene is properly exposed, the dog is overexposed. Saved as a JPEG, the details in the dogs fur are completely lost and unrecoverable. The same image shot in RAW is able to use tools like recovery and exposure control to regain all of the detail in the dog’s fur. This demonstrates how even a shot that is technically correct for the rest of the scene may still suffer from being shot in JPEG.

RAW or JPEG – Which is for you?

Since I am far more likely to forget to change my camera from JPEG back to RAW when I need to, I simply leave it on RAW and take the disk space penalty. With a large wedding costing me around 10-12gb of space, it isn’t that big of an issue. If I upgrade this year to a 50D or 5D MkII and I move to having 30-40gb of space per wedding, I may have to rethink this strategy. What I like about shooting RAW for weddings is that in the thick of things, if you do make a small error in exposure or white balance, it is far easier to correct it afterwards. I don’t use this as a crunch, but it is a safety net.

To decide If you should stick with JPEG all you need to do is to take a close look at your images and compare them with what you can get from a product like Lightroom and then decide if your images are good enough or if any improvements that you get from using the RAW image are noticeable and worthwhile.

What do some other photographers say?

Mark Teskey “RAW only. Shooting JPEG is like working without backing up files or a second body/flash. There’s no safety net with JPEG.”

JE Images “RAW all the way. if I need to tweak anything then I have full access to all the info..”

Denise Clay “[I shoot] RAW – I used the best film I could that matched the job in film days, why not do the same now with the best digital file?”

MrsBoesch “I shoot JPG. It takes up less space on my hard drive, and I am of the opinion that you should try to “get it right” the 1st time”

So what are you to make of this?

There is certainly a case to be made that higher quality final images can be made from using RAW files and that shooting in RAW provides a technical safety net (even if you dont need it because you are wicked good). The main issues of working with RAW for me are the non-destructive workflow and the ability to have multiple virtual copies of an image without eating up more disk space. I do believe that almost all of the main complaints about RAW have been more than satisfied with current software leaving the issue of disk space and storage being the only real issue, albeit a signifigant issue for some people.

In the end, the only thing that matters is that you are happy with the images that you are delivering and if you are shooting for clients, that they are happy with the images you are delivering. If you are shooting in JPEG and are happy with your images and you see no compelling reason to switch, then don’t. If someone like Carlos Baez can shoot a wedding in JPEG and he makes a LOT more per wedding than I do, I am not going to tell him he is wrong for shooting in JPEG. On the flip side, if you are shooting in RAW and the disk space is killing you and you are good enough that your images require basically no tweaks for color, white balance, exposure, fill light, highlight recovery, or saturation, then you may be a good candidate for shooting in JPEG. It all comes down to a personal choice. There is no right or wrong answer to this debate, its just a question of what works for you in order for you to deliver the best quality images to your clients.

Author: Kerry Garrison

Overview

The VerteX is designed to give the ultimate in lighting control from a typical speedlight by allowing almost an infinite amount of adjustment. The VerteX is a mechanical device that can accept one or two panels on it to allow you to send the light in the specific direction(s) that you want.

The VerteX works by having a swinging arm that can have either one or two flaps attached to it that can rotate 360 degrees. Each flap has a mirrored side and a white diffusion side.  By adjusting the swing arm and the flaps you can split the light coming out of your accessory flash and send the light in different directions. Nothing else on the market today gives you this much control over your lighting.

Setup

Normally I would go into a real lengthy section and maybe even some step-by-step pics showing how to assemble a product. Bust seriously, the VerteX takes about 30 seconds to setup, you will spend more time reading this paragraph than you will spend setting the VerteX up. You take the two arms and snap them into place in the holes on the sides of the rubber band, push them together over the cross piece, and push the flaps into place, which are held there with magnets. That’s it. I find it easier to get onto the flash if you attach the rubber band to the flash head right after putting the two arms on and before attaching the cross bean and flaps. In under a minute you are ready to start taking pictures with the VerteX.

Usage

I am going to be really honest here, if you really don’t understand lighting, you may have trouble previsualizing what you can achieve with the VerteX. However, if you are the type of person who can look at a scene and know, for example,  that you want a slight shadow from one direction, a little fill up front, and some top lighting, then you will be able to use the VerteX to it’s full potential. Since you can split the light and send some forward, some up to bounce off the ceiling, some left to bounce off a wall, you can achieve lighting effects that otherwise would have required multiple strobes.

Results

Before getting into wedding photography I did mostly product photography so using multiple lights was second nature, getting into wedding photography felt very limiting as it really isn’t practical on most shoots to lug around multiple light sources, radio remotes, light stands, etc and the current light modifiers on the market work very well in specific situations, but there hasn’t been a product that could really give you the flexibility of multiple light sources from a single strobe head until the VerteX. Here are a few shots from a recent wedding where I used the VerteX to get some really nicely lit indoor shots.

Summary

While the VerteX may look like a homing beacon for an alien spacecraft, it does exactly what it is intended to do. I am thrilled with the control over the light that it gives me and enables lighting that simply wasn’t possible before.  For $49.95, it isn’t any more than other brand-name modifiers but it does give you a level of control that other products do not. I have used the VerteX at several weddings now and it has not come off my flash yet. The only real negative thing I can say is that if you happen to bump something and one of the flaps comes off, they are so light that you stand a good chance of not noticing since you usually wont hear it hit the ground. Most of the time I use it as pictured in the image to the right with only one flap, so if I actually lost one for good, I could get by for a while, so keep an eye on the panels wqhen you are moving your equipment around.

Here is a little video showing more about the VerteX and how I use it.

VerteX Light Modifer from Presslite from Kerry Garrison on Vimeo.

Product Review Scorecard

Product Page: http://www.presslite.com/vertexinfo.php
Company Page: http://www.presslite.com

Author: Kerry Garrison

What is selective Focus?

We have talked about selective focus here numerous times using depth of field (here) (here) (here) and lenses such as the Lensbaby 3G. Selective focus simply means that the main subject of the image is in sharp focus while the rest of the image is blurred out, this forces the viewer’s eye to the section of the image that we want them to be looking at. This can have a dramatic effect on the image and give it a much more dramatic feel. The problem with simply using aperture settings to control the selective focus is it doesn’t allow you to control the shape, direction, direction, or opacity of the blur effect. With a Lensbaby lens you have more control over the sweet spot of the focus area but you are limited to a round pattern and you don’t have some of the other controls either, and you can’t do a true tilt-shift effect with a Lensbaby lens. With a tilt-shift lens you have more control in the different directions but you still can’t control some of the effect, a tilt-shift lens will also set you back over $1,000. This is where Focal Point comes in. You can use your high quality auto-focus glass to take a great picture, and then add a variety of selective focus effects to the image in post production.

Lensbaby Image

Comparison to using a specialty lens

Before jumping to conclusions, bear in mind that I am a fan of the Lensbaby lenses and I use them at different times to achieve a look that I know how to get in-camera. I have the new Lensbaby Composer and have a review of it coming as well. I know what that lens will do and I use it to create images like the one you can see here. You get a sweet spot where the lens is pointing and then there is a blurring effect that gets more intense the further away from the sweet spot you get. If you are a huge fan of doing things in-camera, then a Lensbaby is a great lens to use. However, the amount of effects that you can get is limited. If you have the time to swap lenses and get the image dialed in, the effect is very cool. If you don’t have a Lensbaby, or if you find later that you have a great shot that would have been even better with that effect, then you are out of luck without a re-shoot. With Focal Point, we can now add the effect in post production and get very similar results.

What can we get with Focal Point?

The best way to see what Focal Point can do is to take a look at several before and after images for comparison.

Original Shot		Focal Point Effect
Original Shot		Focal Point Effect

Using Focal Point

Focal Point installs as a Photoshop plug-in for Photoshop CS3 or CS4. Once launched you can move the “Focus Bug” around to select your sweet spot, and then grab on the handle to adjust the effect. You also have 3D effects that can control the focal plane by holding down the alt key on Windows or the Option key on the Mac and dragging within the focus bug.

Focal Point Plug-In Interface

On the right side of the interface are sliders for fine tuning the effect as well as adding a vignette effect and film grain into the blurred image. Any of the settings can then be saved as a preset for easy access at a later time.

Key Features of Focal Point

While we have mentioned most of them already, let’s take a quick look at the key features of the Focal Point plug-in:

• Focus Bug
  This unique control gives you very simple control over the effects. Just drag and click to move the sweet spot or to adjust the amount of effect.
• Aperture Shape
  While we have only looked at the round shape so far, you can also use a planer shape that simulates narrow depth of field that is often used with food or macro photography or for simulating the miniature effect that you can get with a tilt-shift lens.
• 3D Tilt
  As mentioned, you can adjust the tilt of the sweet spot to create the effect of a tilt-shift or view camera.
• Blur Types
  You can choose from a standard “defocused” look or add a bit of motion to the blur
• Add Layer Mask
  By default (you can turn this off if you want) a new layer is created in Photoshop containing the image with the effect applied. This allows you to change the opacity of the layer or paint out areas that you don’t want affected.
• Vignettes
  Focal Point allows you to add either a dark or light vignette effect to the image with the ability to adjust the amount of the vignette as well as the midpoint.
• Presets
  If you have created an effect that you like and may want to use again, you can save it as a preset within Focal Point so you can easily apply it to another image later.
• Film Grain
  While you may not think you want to add grain to an image, adding the film grain effect to the blurred image will help to maintain a realistic image as well as prevent posterization during printing.

System Requirements

Macintosh

• Mac OS X 10.4.10, 10.5 or Higher
• 1 GHz or faster G5 or Intel Core Processor(s)
• 1GB RAM (2GB+ recommended)
• 25 MB hard disk space for installation
• OpenGL 1.5 Compatible video card with 128MB VRAM at 1024×768 or higher.
• Adobe Photoshop CS2 (9.0.2) CS3 or Elements 4.0.1 and higher.
• Internet Connection & Flash 9 player
• Adobe Acrobat 6 Reader or higher

Windows

• Windows XP SP2, Vista or Higher
• 1 GHz or faster Pentium 4 processor(s) or equivalent
• 1GB RAM (2GB+ recommended)
• 25MB hard disk space for installation
• OpenGL 1.5 Compatible video card with 128MB VRAM at 1024×768 or higher.
• Adobe Photoshop CS2, CS3 or Elements 5 and higher
• Internet Connection & Flash 9 player
• Adobe Acrobat 6 Reader or higher
• Microsoft dotNET Framework 2.0 or higher

Focal Point Demo

Here is a video of Focal Point in action so you can get a feel for how it works.

Focal Point Demo from Kerry Garrison on Vimeo.

Results

Focal Point retails for $159.95 which puts it into the mid-range of prices for lenses from Lensbaby and is significantly cheaper than a tilt-shift lens.  Given that you have more control with Focal Point than you do with any type of lens, its hard to argue the value of Focal Point. There are certainly people like myself who enjoy using specialty lenses as they force you to slow down and really think about the image you are trying to make. Even for me though, there are times when I look at an image and wish I would have broke out the Lensbaby to take the shot and now I can get the effect that I want in post production. The effect that Focal Point creates may not be for everyone but if you shoot weddings, food, macro, still life, or nature shots, then Focal Point can add a new dimension to your images.

Product Review Scorecard

Product Page: http://www.ononesoftware.com/detail.php?prodLine_id=35
Company Page: http://ononesoftware.com

Author: Kerry Garrison

With Extreme 24.5-Megapixel Resolution, Processed Image Files Exceeding 138 MB, Five Frame-per-Second Burst Speed and Nikon Core Technologies, the D3X Ushers in a New Level of Image Quality

MELVILLE, N.Y. (Nov. 30, 2008) - Nikon Inc. today announced the D3X, an FX-format digital SLR featuring extreme 24.5-megapixel resolution and superb low-noise capabilities, which provides professional photographers with commercial-quality image performance in a familiar and extraordinarily versatile D-SLR form factor. In conjunction with the groundbreaking Nikon FX-format D3, the D3X tops off a collection of flagship level, rugged, professional caliber digital single lens reflex cameras engineered to excel in all types of professional photographic disciplines from photojournalism and sideline sports, to commercial in-studio applications.

The foundation of the enhanced performance of the D3X is its FX-format, 24.5-megapixel (6048 x 4032) CMOS sensor providing commercial, high fashion, fine art and landscape photographers with the extreme resolution, dynamic range, color depth, detail and sharpness that clients demand. Whether creating catalogs, magazine covers, billboards or gallery prints, the large 5.49-micron pixel size and high signal to noise ratio produces vibrant images with breathtaking image fidelity while reducing lost highlights and shadows, and ensuring smoother tone reproduction with minimized noise. With full resolution shooting speeds of up to five frames-per-second (fps), and 14-bit files, that when processed are approximately 138 MB, the D3X offers today’s photographic artists an extreme level of performance and versatility ready for demanding assignments in the studio or on location.

“In 2007, the 12.1-megapixel FX-format D3 delivered groundbreaking digital SLR image quality, coupled with incomparable high ISO, low noise performance and high-speed handling. In doing so, the D3 broke photographic barriers, enabling photographers to work in ways never before possible,” said Edward Fasano, general manager for Marketing, SLR Systems Products at Nikon Inc. “Now, the new 24.5-megapixel FX-format D3X D-SLR provides the extreme resolution and high dynamic range capabilities needed to meet the extraordinary needs of photographic disciplines such as high fashion, commercial advertising and fine art. The D3X delivers this remarkable capability while fitting seamlessly within the Nikon system, taking full advantage of Nikon’s world-renowned collection of NIKKOR lenses and Speedlights.”

Image Quality Takes Center Stage
To re-emphasize the importance of image quality above all else, the D3X delivers an incredible level of digital SLR performance to provide photographers with extremely high resolution, exceptional dynamic range, phenomenal total gradation and outstanding color reproduction. Image files can be recorded as TIFF, JPEG or NEF (RAW) formats in either 12- or 14-bit compressed or uncompressed formats, and recorded to UDMA compatible CompactFlashâ„¢ cards for optimum speed. Photographers can save image files directly to the dual card slots as overflow, backup, or as separate file formats to different cards. Building on the D3X’s flexibility, users have the creative option to shoot in the 5:4 crop mode with 20.4-megapixel resolution, the ideal format for creating 8 x 10-inch portraits. While using DX-format lenses, faster continuous shooting of up to seven frames per second can be achieved at a resolution of 10.5 megapixels.

The exceptionally low noise of the D3X is essential to any professional commercial application, and it provides photographers with an ISO range of 100 to 1600, expandable to 50 (Lo-1) and 6400 (Hi-2). The ultra smooth tones and lack of grain at ISO 1600 as well as at low sensitivity settings result in smooth, natural skin tones and exacting detail that, before the D3X, required larger and far costlier studio-bound camera systems.

Advanced Technologies, Meticulously Executed
In a commercial setting or on location, imaging professionals need high performance in both speed and processing. The Nikon D3X can shoot at up to five fps at full resolution or up to seven fps in DX crop mode, allowing photographers to catch the split-second difference in a model’s expression or capture all of the action in a sequence. Just like the D3, the D3X achieves a start-up time of a mere 0.12 seconds and a shutter release time lag of 0.04 seconds.

The D3X’s speed, as well as high levels of performance, leverages Nikon core technologies including a newly enhanced EXPEED™ Image Processing System, specially designed for the D3X to provide superior image quality, faster processing speeds and lower power consumption. This advanced system is able to achieve extremely precise color reproduction for a broad spectrum of hues, in addition to vivid saturation and smooth gradation. What’s more, Nikon’s advanced noise processing function is engineered to minimize noise at all sensitivities and operate seamlessly without interfering with other image color parameters.

The D3X also features Nikon’s exclusive Scene Recognition System, which continuously analyzes information from the 1,005-pixel RGB light sensor, to further refine auto exposure, auto white balance and autofocus calculations. This results in flattering portraits and awe-inspiring landscapes that portray accurate color and fine details. Nikon’s exclusive 3D Color Matrix Metering II helps ensure accurate exposures, even in the most challenging lighting conditions. Instantly evaluating each scene before capture, input data from the system’s sensor is automatically referenced against an internal database of more than 30,000 images derived from actual photographs to calculate correct exposure values. Active D-Lighting, used in combination with 3D Matrix Metering II, helps to determines proper exposure, and creates realistic contrast while compensating for lost shadows and highlights. Prior to shooting, users can choose from Extra High, High, Normal, Low or Off settings, as well as an Auto mode.

Additionally, the D3X features Nikon’s exclusive Multi-CAM 3500FX focus module, with 51 AF points, 15 cross type sensors and 36 horizontal sensors that easily track and lock onto moving subjects, delivering the same fast and accurate AF performance that helped make the D3 immediately successful. Users can select any of the AF points, making it easy to consistently attain accurate focus right on a subject’s eyes, frame after frame. Additionally, three AF-area modes – Single point, Dynamic-area AF and Auto-area AF – are available to maximize the use of the 51 focus points by selecting the most suitable one to match subject conditions. AF is also available in one of two Live View modes optimized for the studio, including a phase detection handheld mode and a tripod mode. This feature allows the user to zoom in up to 27x on the LCD screen to ensure critical focus. While in Live View, the graphic indication of a virtual horizon is also available, making it easier than ever to confirm camera orientation.

To further ensure each photographer’s ability to balance their personal style, Nikon’s Picture Control System enables users to adjust their images to pre-set parameters such as Standard, Neutral, Vivid and Monochrome that apply tweaks to image sharpening, tone compensation, brightness, overall tone and saturation. Photographers have creative control over these image parameters with the use of up to nine available customizable presets.

Synchronizing Both Form and Function
Engineered for real-world functionality, the D3X retains a rugged shell with moisture, dust and shock resistance that has become a hallmark of flagship Nikon D-SLRs, while preserving the usability and ergonomics that allow the camera to remain an extension of the photographer’s vision. Attention to detail goes so far as to include a self-diagnostic shutter system that is tested to exceed 300,000 cycles for maximum durability and longevity. The camera’s body also maintains the resilient magnesium alloy construction and form factor of the D3, promoting consistent Nikon system synergy.

A bright and accurate viewfinder offers 100 percent coverage with 0.7x magnification. The body also houses Nikon’s acclaimed 3.0-inch super density LCD screen, now relied upon by so many photographers. The high-resolution 920,000-dot screen is viewable at wide angles up to 170 degrees, and will allow photographers to quickly zoom in to confirm critical focus. Users can also output the video signal to an external display via HDMI to allow client viewing. Thanks to incredibly efficient internal circuitry, the D3X can capture up to 4400* shots per single charge of the camera’s Lithium ion battery.

System Strength Withstands the Test of Time
The D3X is fully compatible with Nikon’s Creative Lighting System (CLS) to give photographers a mobile lighting solution that is easy to manage. To further enhance mobility, the D3X is compatible with Nikon’s GP-1 GPS receiver to gather information such as latitude, longitude, altitude and date of shooting. Photographers can easily shoot tethered via USB, or use the WT-4a wireless transmitter to send images wirelessly when speed and mobility are essential. D3X users will also enjoy the system strength of more than 50 genuine NIKKOR lenses that provide outstanding sharpness and high resolution across a broad range of focal lengths.

Price and Availability
The Nikon D3X will be available at Nikon Authorized Professional Dealers starting December 2008, and will be available for an estimated selling price of $7999.95.**

* Based on CIPA Standards
** Estimated selling price listed is only an estimate. Actual prices are set by dealers and are subject to change at any time.

The new versions are:

• Digital Photo Professional 3.5.1
• EOS Utility 2.5.1
• Picture Style Editor 1.4.1
• WFT Utility 3.3
• Canon RAW Codec 1.4

To access the updaters, click here, then select your operating system from the Drivers / Software Selection pulldown menu.

[Via Rob Galbraith]

To get the code for your own site, go to:
http://www.widgetbox.com/widget/camera-dojo-take-better-pictures-dslr-canon?__fsk=24119957

This is what the Camera Dojo widget is like:

Press Release:

Canon brings HD moviemaking and 4fps shooting to its PowerShot super zoom series

United Kingdom / Republic of Ireland, 17 September 2008: Canon today supercharges its PowerShot digital compact camera range with two powerful new models: the 10 Megapixel PowerShot SX1 IS and PowerShot SX10 IS, which jointly replace the PowerShot S5 IS.

Both raise the benchmark for compact zooms with an outstanding 20x wide-angle (28mm) optical zoom, with USM and VCM for fast, silent, zooming. The  PowerShot SX1 IS offers a revolutionary series of features never seen before on a Canon compact camera – a 10 Megapixel Canon CMOS sensor, 4 frames per second continuous shooting, and full HD movie capture – while both cameras use Canon’s new DIGIC 4 processor for fast performance and richly detailed, clean images in a wide range of shooting situations.

Unbeatable reach
With a Canon 20x wide-angle (28mm) optical zoom lens, the PowerShot SX1 IS and PowerShot SX10 IS tackle everything from long-range telephoto shots to sweeping landscapes. Canon’s Ultrasonic Motor (USM) combines with Voice Coil Motor (VCM) technology for near-silent operation and the speed for sports or wildlife subjects. And thanks to Canon’s optical Image Stabilizer – which now offers a 4-stop advantage – camera shake blur is avoided even with the zoom fully extended.

10 Megapixel power
The PowerShot SX1 IS and PowerShot SX10 IS feature resolutions of 10 Megapixels, capturing all the necessary detail for poster-size prints or creative cropping in post processing. A Canon CMOS sensor allows the PowerShot SX1 IS to shoot full-resolution JPEGs at speeds of up to 4fps – making it a powerful, pocket-sized tool ideal for capturing fast-paced action sequences.

High Definition moviemaking
For the ultimate in visual quality, the PowerShot SX1 IS delivers 1080p (30fps) High Definition video – ready for instant playback on any HDTV via a built-in HDMI connection. The PowerShot SX10 IS offers fun, spontaneous VGA movie shooting. Movies on both cameras are enhanced with CD quality stereo sound, optical zooming and Face Detection Technology; and if extra reach is required, the PowerShot SX1 IS includes Canon’s Advanced Tele-Converter for an extra 2x zoom with no loss in movie quality.

DIGIC 4: intelligent processing for better photos
The PowerShot SX1 IS and PowerShot SX10 IS both feature Canon’s new DIGIC 4 image processor. As well as ensuring ultra-fast operation and superb, low-noise images, DIGIC 4 drives several intelligent technologies that make great photos easier than ever.

People shots benefit from improved Face Detection Technology, which even detects faces positioned at an angle to the camera, or in profile. Face Select & Track tracks a specific subject even more accurately, while a new FaceSelf-timer function – which automatically triggers the shutter shortly after a new face enters the frame – makes group shots and self-portraits easy.

Canon’s improved Motion Detection Technology delivers fantastic, sharp results by registering camera and subject movement, then automatically adjusting ISO to prevent image blur. Blur is further guarded against by new Servo AF, which continuously adjusts focus on subjects moving towards or away from the camera.

DIGIC 4 also powers Canon’s new i-Contrast feature, which brings out great, natural-looking detail in dark areas of pictures – without blowing out lighter areas.

Total Control
For the ultimate creative precision, the PowerShot SX1 IS and PowerShot SX10 IS offer full manual control over both aperture and shutter speed. A Multi Control Dial offers fingertip access to all key settings. Plus, compatibility with a range of accessories – including Canon’s professional Speedlite EX flash units – extends creative potential even further.

Also included with the PowerShot SX1 IS is Canon’s WC-DC300 controller, which allows wireless control of shooting and playback. This is ideal for tripod shots at slow shutter speeds, or any situation where keeping a distance from the camera is preferable.

“Both of these cameras offer exceptional imaging possibilities,” said Mogens Jensen, Head of Canon Consumer Imaging, Europe. “In particular, the PowerShot SX1 IS genuinely redefines what a compact digital camera can do. This kind of power and versatility must be experienced to be believed.”

Pricing & Availability
The PowerShot SX1 IS is available from December priced at £519.99 / €679.99 RRP inc VAT
The PowerShot SX10 IS is available from October priced at £359.99 / €469.99 RRP inc VAT

Features at a glance:

• 20x wide-angle (28mm, f/2.8) optical zoom with optical Image Stabilizer
• 10.0 Megapixels
• Canon CMOS sensor for full resolution continuous 4fps shooting (PowerShot SX1 IS)
• Full HD (1080p, 30fps) movies plus HDMI output (PowerShot SX1 IS)
• DIGIC 4 for outstanding images and fast response times
• Shooting modes include full manual control
• Great people shots with Face Detection AF/AE/FE/WB plus Face Select & Track and FaceSelf-Timer
• Targets every possible cause of blur with High ISO Auto, optical Image Stabilizer, Motion Detection Technology and Servo AF
• Auto Red-Eye Correction in shooting and playback
• i-Contrast boosts brightness and retains detail in dark areas
• 2.5” vari-angle LCD II with wide viewing angle plus electronic viewfinder (PowerShot SX10 IS)
• 2.8” widescreen vari-angle LCD II with wide viewing angle (PowerShot SX1 IS)
• Multi Control Dial and customizable My Menu
• Smooth, 30fps VGA movies (PowerShot SX10 IS)

• 21.1 Megapixel Full-frame CMOS sensor, 14-bit A/D conversion (16,384 colors/each of 3 primary color), wide range ISO setting of 100-6400 (expandable L: 50, H1: 12800 and H2: 25600).
• Full HD Video capture at 1920 x 1080 resolution for up to 4GB per clip with HDMI output for HD viewing of stills and video.
• Next generation DIGIC 4 Image Processor for faster processing of fine detail and color reproduction as well as reduced image noise.
• High performance with 3.9 fps continuous shooting, new shutter with a durability of 150,000 cycles and improved weather-resistant body.
• Live View Function for stills (Quick, Live and Face Detection AF modes) and video.
• 3.0-inch Clear View LCD (920,000 dots/VGA) monitor with anti-reflective and scratch-resistant coatings for improved viewing and smudge protection.
• Updated EOS Integrated Cleaning System specifically designed to work with a full-frame sensor.
• Compatible with over 60 Canon EF/EF-S lenses and most EOS System accessories.

The EOS 5D Mark II features a huge, full-frame sensor. A 21.1-megapixel CMOS sensor delivers images of up to 5616 x 3744 pixels. And since it is full-frame, all lenses will deliver the angle of view they would on a 35mm camera without a conversion factor. This comes in handy especially when shooting with wide-angle lenses. For the flexibility to shoot in even the most dimly lit situations, the EOS 5D Mark II offers Canon’s highest ISO sensitivity to date, ranging from 100-6400 (expandable to ISO L: 50, H1: 12800 and H2: 25600). Thanks to improved noise reduction technologies, images shot even at highest sensitivity will be remarkably smooth.

The Canon EOS 5D is slated to ship towards the end of November 2008 at an expected street price of US$2699 in the U.S.

First off you need to realize that studio flashes like the PhotoBasics StrobeLites are not automatic like the on-board or accessory flash on your camera. A studio light doesn’t know what you are trying to do and will not adjust itself for the camera settings you have dialed in. You also need a means of firing the lights off when you press the shutter, all that and more will be covered in this article.

Connecting the lights to your camera

PC Sync port on Canon 30D

The first thing we need to do is to connect the lights to your camera, for this we are going to need what is called a PC Sync port. On most Canon DSLR’s the PC Sync port is on the left side of the camera under a rubber flap. In the image here you can see the PC Sync port and the end of a PC Sync cable. In my typical setup I will have the main light plugged into the PC Sync port to fire it and the other lights will automatically fire at the same time because they have a built-in optical slave that will fire the flash when another flash is detected. Since this happens far faster then the mechanical shutter, the effect is that all of the lights fire at exactly the same. There is a limit of how fast the lights will sync to the camera but we will address that in a moment.

Weim Hot Shoe Adapter

If you are unlucky enough to not have a PC Sync port on your camera then you will need to purchase a hot shoe adapter. The recommended one is the Weim Hot Shoe Adapter which sells for about $50 at most places. This will got into your camera’s hot shoe (when an acessory flash plugs in) and has a PC Sync output port on it.

As I mentioned, the lights do have an optical slave so they will fire when another flash is used so you may think you can just use the flash that is built into your camera to fire off the big lights. While this will work to an extent, the problem is that unless you know how to adjust your flash’s output compensation, the flash is going to fire at a level that your camera expects will be correct for the given light, when the big lights fire along with the built-in flash, your subject will no be over-lit and the scene becomes overexposed.

Rear view of StrobeLite

The opposite end of the PC Sync cord plugs into the back of the light. In this image you can see the 1/8th inch mini plug port on the bottom right hand area of the strobe head. With the camera and the lights connected, you are all ready to take some amazing images right?

If ONLY it was that easy. Now actually comes the hard part, figuring out how to get the light set right for a proper exposure. Hang in there, it won’t hurt too much.

Getting the lighting right

Output Adjustment Dial

Nice, quality studio lights make your lighting easier right? I wish! In the last section I explained that your on-board or accessory flash will meter the scene and use the appropriate output for the exposure metering, not so with studio lights, at this point you are full manual.

On the flash will be an adjust dial to control the amount of light output. On the StrobeLites this goes from full power down to 1/4 power given you two stops of light output control. If you have a light meter and know how to use it, you have all the tools you need to get the shot right the first time. If you don’t have a light meter then you will need to continue reading.

Since I shoot with he same lights, in the same studio, with the same basic setup the vast majority of the time I know the basic light setup that will work without have to take too many test shots, I can usually get it dialed in within about three shots.  A key thing to note is that your meter in your camera is basically worthless at this point. You are going to want to shoot in manual mode otherwise the camera is going to try to adjust your settings for the metered light. In manual mode you have total control. So where should you start?

For most of my pictures I start with the following basic settings:

ISO: 200
f/Stop: 11
Shutter Speed: 1/200th second

In fact, those are the exact settings I used for the previous pictures in this article so far. Why these particular settings? For one, I like shooting at ISO 200, I like the results I get at that speed, f/11 is my normal aperture setting unless I am going for a particular depth of field effect. That leaves two ways to adjust the amount of light I need. I can either adjust the shutter speed or adjust the light output of the flash. You may think that you may want to go with a faster shutter speed to make sure you dont introduce any camera blur but in most cases you can’t shoot any faster than 1/200th or 1/250th depending on your lights/camera combination. With the PhotoBasics StrobeLites and a Canon 30D, I have never had an issue at 1/250th but I like the extra margin of safety of using 1/200th. Let’s take a look at what happens if you shoot faster.

Out of Sync Image

The image shown here was shot at 1/640th of a second, while this would be perfect safe if I was using the Canon 580 EX flash, the StrobeLites cannot sync with the camera at that speed so what happens is that the strobe went off too late causing the image to be partially cutoff by the closing of the shutter mechanism. Because of this issue we are limited to speeds of 1/200th or less so I usually will stick it at 1/200th and be done. That leaves adjust the light output higher if I need more light or using a lower output or a slower shutter speed if I need less light. Knowing that the only things I will need to adjust are my light output or shutter speed I have really reduced my possible settings from a handful down to basically one, and its either shutter speed or light output.

Since most of my shots are product shots, the lights are generally pretty close to the objects so I will start at a very low power output of the flash, if its too bright at the lowest setting and I am already at 1/200th of a second the only way to cut down on the light being captured is to move to a smaller aperture setting like f/22. If the light isn’t enough I can just reach up and dial in more light or use a slower shutter speed.

With a little practice and a handful of confidence, you will be getting your lighting dialed in within a few shots. Take your picture and then look at the histogram of the image on your LCD of your camera to double-check the exposure. If its too dark, bump up the light, if its clipped out, dial down the light. Nothing will beat just a bunch of practice with your own lights/camera/lenses/environment to get you familair with how your lighting setup will work the best and soon you too will be able to get it dialed in perfectly within just a few quick test shots.

Author: Kerry Garrison

I have been a fan of Wolverine products for almost four years now and my trusty Wolverine FlashPac was in need of an upgrade. Not that the FlashPac didn’t do it’s job, its just that it was pretty slow and didn’t have a display that could be used to view the images. Without hesitation I turned back to Wolverine to see what they had available and I found the new ESP Digital Photo Album and Multimedia Player. While the full name may be a bit long, it does convey a lot more of the ESP’s features as well as being a card reader, external hard drive, and FM radio.

Overview
The ESP is an incredible multimedia device that can handle most all of your portable multimedia needs from listening to MP3′s, watching videos, playing a photo slideshow, or listening to FM radio. While many people will love all of those features, from a photographers point of view the most important things to me are the ability to do backups of my compact flash cards in the field, review the pictures on the device, and to have a portable device to show potential clients a slideshow of my work. The ESP does all of these tasks quite well and at a price that won’t make you wonder why you didn’t just buy a nice laptop instead.

Top view of the ESP

Features
As already mentioned the ESP has a multi-function card reader that can either make backups to the internal hard drive of the ESP or when connected to your computer’s USB port your cards will appear of drives that you can access directly.

• Store and View Thousands of Photos

• • Download images directly from any digital camera without a computer
  • Use it to backup and carry all your digital images
  • Display JPEG, Bitmap, Tiff, Text and RAW images (most popular SLR Cameras)
  • Print directly to printers

• Store and Play Thousands of Songs

• • Supports five music Formats: MP3, WMA, OGG, WAV, AAC (MP4-audio) & CDA
  • Easy, drag and drop music files from your computer and play them instantly

• Store and Play Hundreds of Hours of Video

• • Supports: MPEG-1, MPEG-4, WMV9 and Xvid

• Built-in FM Radio

• • Listen and RECORD your favorite talk shows or music from any FM Radio Station
  • Scan and preset up to 18 different Radio Stations

• Plugs to TV and Stereo System

• • With the included Video/Audio cable connect the ESP directly to any TV or Projector
  • View a slide show of your favorite photos or watch recorded videos on the big screen
  • Connect to a stereo system to enjoy and share your music collection

Setup
The setup of the ESP is quite simple, it comes with both an AC adapter and a USB cable, be sure and plug it in until fully charged before using it the first time, after that the simple to navigate menu system walks you through everything you need to know.

“The ESP was a lifesaver for us at a fashion shoot when the assistant left the CF cards back in the car. With the ESP we would fill up a card, tell everyone to take a five minute break, dump the cards to the ESP and get right back to shooting.” – David , Esquire Photography

ESP Controls

Usage
The ESP’s operating system is very simple to use and works the way I would expect it to, when I insert a card it pops up and asks me what I want to do with it, I select backup and it just starts working. The main controls consist of the “joystick”, a menu button, and the ESC button.

Using just these three simple controls you can manage everything on the system. The “-” and “+” buttons control volume. The only other control is the power button on the right side as well as a lock control to keep the power from coming on accidentally.

At the bottom you can see a small mic port for doing audio notes and near the top are the LED indicator lights.

The has an optional docking station that can also be used for capturing video and audio from remote devices. Since I don’t have a use for that right now I didn’t get one yet to see how that works.

ESP Menu System

The menu system is an icon driven system with easy-to-read captions to help you navigate. Pushing left/right or up/down on the directional pad will move you from application to application and then pushing in will select the item. The Menu key will give you a list of available options from wherever you are while the ESC key will back you out one step at a time.

The main thing to keep in mind is that images that are backed up from a memory card are found in the Backup application instead of the Pictures application. You have to specifically copy images into the Pictures folder for them to be viewed there. This is a great way of having a photo slideshow of images without getting confused as to what images are from your current photo shoot.

What I actually like to do is to backup my images to the ESP and then if I have time, review them for focus issues or just for being a bad image, I can delete them right from the ESP and save time later when importing the images into my computer.

ESP playing video

For client meetings, I also created a couple of really nice slideshows using Proshow Gold and output them formatted properly for the ESP. Let me tell you, the image shown here does not do the ESP justice, the screen may only be 320×240 but the slideshows and pictures look fantastic on it. So far, everyone that has seen the slideshow videos on the ESP have been very impressed.

The ESP has a bunch of other features that I could spend a few more pages writing about but they really don’t have much appeal to me, these include the mp3 player, the FM radio, the audio recorder, and the Tetris-like game that is included. While those are nice add-ons, they really aren’t the main reason a photographer is going to want the ESP.

Tested Transfer Speeds (1gb of data)

Reader to Computer    3:31 minutes
Reader to ESP    3:43 minutes
ESP to Computer    1:44 minutes

Why the ESP?
Why would I choose the Wolverine ESP over the Epson P-5000? The simple answer is a cost/benefit analysis blows the Epson out of the running. For almost twice the price of the Wolverine ESP, the Epson P-5000 offers basically a nicer screen. When the folks at Wolverine decided to make a new device, they interviewed tons of photographers and asked them what they would like to see that would compete against the Epson units and the top answer was that they wanted a much more affordable device even if it meant having a lower resolution LCD display.  If I am going to spend $800 for a portable media device, its going to be a new laptop, not a small box I throw into my camera bag and use mostly as an external drive and card reader. Coming in at $329, the ESP is much more affordable and does it’s job exceptionally well. It’s a nice upgrade from my old FlashPac in terms of functions and download speeds which is a nice bonus as well.

What’s in the box
In the box you will find the ESP unit itself along with the nice quality carrying case along with the user documentation and CD, AC charger, USB cable, Audio/Video cable (to connect to TV), and Earphone.

Summary
The Wolverine ESP competes nicely against other units offering similar features and at a price that doesn’t give you sticker shock. The base features do exactly what they are supposed to do while there are enough extras to add even more value to the package. I don’t leave for a shoot without my ESP in my bag and often will be making my backups of my cards on the drive home. With my old Flashpac I would have to be quite far away to actually finish a large backup on the drive home but now it takes a fraction of the time.

Final results:

Website: Wolverine Data
Author: Kerry Garrison

Website: ifoundyourcamera.net

World Wide Photowalk Day Info
http://www.photoshopuser.com/photowalk

As part of World Wide Photowalk Day, I am hosting a photowalk on August 23rd around the Orange Circle area in Orange, Ca. If you would like to come hang out and get some great photos of this interesting area, just signup to participate. The Photowalk is open to everyone even if you only have a small point and shoot camera or even just your cell phone camera, the goal is to get people outdoors, socialize with new people, and have some fun while taking photos. I only have room for 50 people for this event, so sign up soon!

Orange Photowalk Info
http://www.photoshopuser.com/photowalk/city/orange.html