The Math
Feel free to skip right over this part, this is the boring part, it’s so boring I thought of putting a picture of an artistic nude shot next to it just to keep people awake. Ok, so here we go. Before you can calculate the depth of field you first must know the circle of confusion for your camera.

Don’t get too lost on me yet, for most of us digital SLR users this is  one of two numbers. For most of us with APS/APS-C sized sensors this number is 0.019948, for full frame sensors (the big Pro cameras) and 35mm film the number is 0.02501. This represents the sensor size. Again, don’t get all lost on me yet, just remember the number for your particular camera.

The first thing we need to calculate is the Hyperfocal distance, for this calculation you will need to know the focal length of your lens. the aperture you are using and the CoC (circle of confusion) for your camera.

The math to calculate the hyperfocal distance is as follows:

HyperFocal = (FocalLength * FocalLength) / (Aperture * CoC)

Thus, the Hyperfocal distance of a 50mm lens at f/2.8 on an APS sensor (Canon 30D in my case) is 146.85 feet.

Next we need to calculate the near point which is the closest distance that will be in focus given the distance bdetween the camera and the subject. The math here (yes, it gets SO much worse) is as follows:

NearPoint = (HyperFocal * distance) / (HyperFocal + (distance – focal))

This is somewhat  complicated because the focal length is in millimeters and those of us in the US are better with feet and inches still so if you want the end value to be in feet you have to do some more conversions. If we are using the same 50mm lens, at f/2.8 on an APS sensor at a distance of 10 feet (3048mm) then our HyperFocal distance is 146.85 feet (44,749.23mm), giving us a near focus point of 9.37 feet (2,856.66mm). Are we following along still? Did I lose anyone?

Alrighty then, let’s now calculate the far point distance, this is almost the same as before but using slightly different math, so here we go.

FarPoint = (HyperFocal * distance) / (HyperFocal – (distance – focal))

Without changing our values that we used before, we now know that are rear point is 10.72 feet (3,266.81mm). Take note that the near point is actually closer to you than the subject is, typically the focus is 1/3 in front of the subject and 2/3 behind the subject.

The final step is to calculate the total amount of focal distance. This is one I can even do without a calculator, we simply subtract the far point distance from the near point distance.

TotalDof = FarPoint – NearPoint

Giving our example so far we have a total depth of field of 1.35 feet (411.48mm).

Let’s get practical
Why on earth would you want to know this? The simple answer is you may not, nor may you ever care to know it. When shooting portraits, weddings, events, and pretty much anything else it really isn’t going to matter much. However, if you are the type that wants to set up a shot and have it be EXACTLY what you want, there is simply no other way to know what the camera is going to do. This is important in macro, food, and product photography. By knowing exactly where you focus points begin and end you can more accurately design and execute precise shots.

Ok, how about the easy way?
This is kind of like taking a digital photography class and having to spend a semester cooking your own B&W film, its good to know the theory before taking on the practical application. So how can we do this easier than having to pull a scientific calculator each time you want to set up a shot?

• f/Calc Spreadsheet (download) – This is an Excel spreadsheet that will do all the math for you. This was development by me and is free to use.
• f/Calc Windows and Palm App (website) If you want a simple but powerful Windows or Palm based application, f/Calc does Field of View, Angle of View, Magnification, Spot Meter, f Numbers, Depth of Field and Hyperfocal distance
• PhotoCalc for iPhone (website) – Not only does it do everything for DoF, it also incorporates a sunrise/sunset function, flash exposure calculator, and Exposure Reciprocation calculator.
• CamCalc (Market) Android App for Depth of field, field of view, focal length equivalents, flash calculations, color temp. conversion, miniatures, and sunrise, sunset.
• PhoforPho (Market) Android App with Exposure calculator, Hyperfocal calculator, DoF calculator, Timer, and Exposure compensation calculation for multiple exposures.

I know this has been a doozy of an article to read through just to get to some free or almost free (PhotoCalc is $2.99) tools to make it dead simple to do these calculation. Hopefully this will help you perfect your images help you to use depth of field to its full extent.

Getting Started
Most cameras, including newer point and shoot cameras will let you shoot in full manual mode. The problem with going manual is that if you don’t have your settings “just right” you can end up with an image that is too dark or too light. Without a basic understanding of the different settings, it can be difficult to get a good shot. However, with a basic understanding of the three variables even the most newbie photographer can learn to take better pictures by getting away from the automatic settings.

ISO Speed
The ISO speed is equivalent to the ISO speed we used to use on film cameras, this describes the light sensitivity of the film that is being used. The higher the ISO speed, the more light the sensor can pick up. For example, if your camera is set to ISO 800 you can take a well exposed image in a darker room than you could with ISO 100. By definition you would always want to run your camera in the highest ISO speed possible. While this may sound like a good idea, the downside is that the higher the ISO speed, the more “noise” will be introduced to the image, thus degrading the image quality. In most cases, you will get excellent results by using ISO 200-400 outdoors and 400-800 indoors. This does not take into account your camera model as some cameras do better than others at the higher ISO settings.

Shutter Speed

Medium Shutter Speed to Show Movement

The shutter speed is one of the easiest settings to understand as it simply means how fast the shutter opens and closes when you press the shutter button. The faster the shutter speed the better the camera will freeze the action of an event. This setting is represented in seconds, a fast shutter speed would be something like 1/2000^th of a second. A long shutter speed such as 1/30^th of a second or slower can result in blurry images if you don’t use a tripod. Like the other settings, the shutter speed also affects the amount of light that hits the sensor. The faster the shutter speed, the less light that comes into the camera. So while a fast shutter speed can freeze action, you need more and more light in order to prevent getting a dark picture the faster you set the shutter. When you cant get a bright enough image, you will need to slow down the shutter speed. In some cases you may want to get a motion blur such as a waterfall or freeway traffic, these shots require a very long shutter speed.

Shallow Depth of Field

Aperture
Understanding aperture is probably the most difficult setting for most people to grasp, because of this we wrote an entire article about it. The aperture is an adjustable opening in the lens that controls the amount of light that can enter the camera. The aperture setting is expressed in f stops with the largest opening having a smaller number so a wide open aperture is going to have an f-stop of around f/1.4. The aperture setting can have a big effect on the depth of field which allows one part of the image to be in focus and the rest of it being blurry which helps to highlight the subject of the photograph.

Starting Points
Without having a light meter or lots of experience how do you know what settings to start with? The way I learned was to set my ISO to what I wanted, typically 200-400 ISO outdoors and 400-800 ISO indoors, and put the camera in P mode and press the shutter half way down. Inside the viewfinder the camera will show the settings it will use to take the picture. Then you can put the camera into Manual mode and adjust the settings to match. After some practice you should be able to set some basic settings fairly close to what they need to be, then, by pressing the shutter half way down the camera will autofocus and then take a meter reading which should show in the viewfinder or on a display depending on your camera. Then you can adjust shutter speed or aperture to change the exposure to get it where you need.

Using the Histogram
If your camera will display a histogram after shooting an image, then you need to take advantage of this feature. By looking at the histogram of an image you can quickly tell if the image was properly exposed or not. With a digital SLR camera you want the histogram to be a nice curve with the curve being just to the right of center like our example one here. This is actually saying that the image is just slightly overexposed. With film, if you overexposed the image, you would lose detail so it was better to slightly underexpose. With digital, shadows will lose detail so it is better to slightly overexpose.

Practice Practice Practice
There is nothing that will beat getting out and getting behind the camera and learning how to use it well. If you plan on making photography a serious hobby or more, you will need to learn how to use manual mode for those times when the automatic or program mode settings just won’t cut it or for when you want to create an effect that you just can’t get any other way.

Get out and practice and be sure to post some comments and post some pictures to our Flickr group.

Links from the show:

SensorPen/LensPen – http://lenspen.com
Camera Slingers – http://cameraslingers.com
Marc Fuller – http://www.thinklikeabride.com/theagency/
Bluehost – http://bluehost.com
Westcott Photo Basics Green Screen Kit – http://photobasics.net/unleash.cfm

Show Hosts

Kerry Garrison
http://kerrygarrison.com
Twitter: http://twitter.com/kerrygarrison Facebook: http://www.facebook.com/profile.php?id=822369545

David Esquire
http://esquirephotography.com
Twitter: http://twitter.com/esquirephoto Facebook: http://www.facebook.com/profile.php?id=636655600

This podcast is also available on iTunes.

Lensbaby Composer

In the beginning there was the original Lensbaby lens, a simple bellows system with push-pull focus and left/right and up/down sweet spot selection. Then c2ame the Lensbaby 3G that allowed you to fine tune the sweet spot after locking it down so that you can easily repeat the same shot and settings.

Now, the Lensbaby Composer promises a lens that is easier to use, better control over focusing, and a selection of different optic inserts to give you a variety of different effects.

Lensbaby 3G and Composer

Comparison to other Lensbaby Lenses

Looking at the difference between a Lensbaby 3G and a Composer, the older models have a flexible bellows that adjusts the focus by pushing it out or pulling it in, the Composer has a focus ring that moves the optic insert in and out. To adjust the sweet spot on an older model you move the lens around on the bellows, on the Composer the optics are held by a ball and socket that has an adjustment ring to adjust the amount of friction so you can have it move easily or even lock it in place and just about anything in between. The older models have a removable aperture disk, the larger the aperture (the smaller the f/stop number) the more dramatic the effect.

Optic System

The new Composer comes with double glass optics that can provide a very sharp image.  Also available are three other optic inserts that can be swapped out for the double glass optic. These other optics include:

• Single glass optic
  This is an update to the original Lensbabies lenses, with the single glass optic you get a subtle, soft, dreamy effect.
• Plastic lens optic
  With the plastic lens this optic has a very soft effect that creates very ethereal photos with abundant chromatic aberration.
• Pinhole/Zone Plate Optic
  In pinhole or zone plate mode, this optic insert achieves softer focus, dreamy images that are equally sharp from edge to edge.

You can see an interactive example of the different optics with different apertures by using Lenbabies’ Optic Comparison guide.

Using the Lensbaby Composer

Composer on Canon 30D

The Composer attaches to your camera like any other lens but there are no electronics in the lens so there is no Auto-Focus and no aperture control from the camera. The Composer is a completely manual lens and the aperture is controlled with different discs that are placed into the bottom of the optics.

Using the older Lensbaby 3G or the original Lensbaby 1.0/2.0 was an exercise in frustration for many people as just adjusting the lens, holding it in place, and holding the camera almost required three hands.  With the Composer, the easiest way to use it is to adjust the friction ring so the lens will move easily but is not too lose and simply shoot away, adjusting up/down/left/right as you see fit and adjusting for focus. If you are using a tripod and want to make sure the lens does not move at all between shots then you can lock the lens on place by tightening up the friction ring.  While this sounds like a lot of work, it is significantly easier than than trying to use two fingers from each hand to wrap around your camera body, look through the viewfinder, compose your images, and press the shutter at the same time.

The Lensbaby lenses are not lenses you will put on your camera and be firing shots off like a machine gun, you need to slow down, get your composure right, get your exposure dialed in, adjust the sweet spot, and make the image versus taking a snapshot. You have to think and work a little more, but the result is an image you made in-camera and got it right.

The Lensbaby Effect

What the lens does is to shift the focus into a “sweet spot” and the blur effect will radiate out from the sweet spot and increase in effect as it moves away from the spot.  In some images the effect can be rather subtle so I purposely chose an image that will show the effect quite well.

Here you can see the front of the car is where I set the sweet spot and the blurring effect increases as it goes away from the sweet spot. This is a very difficult look to do with software although some plugins are getting very close these days.

This differs from a true tilt-shift lens in that the Lensbaby lenses can’t correct perspective like a tilt-shift lens. The Lensbaby is more of a special effects lens which can create some very interesting images. While the car shot demonstrates what the Composer can do, that isn’t what you are typically going to do with it. Many still life shots are shot with Lensbaby lenses and I suspect we will even see some cool video from cameras like the new Canon 5D MkII.

The Lensbaby Composer is roughly a 50mm focal length so when it is used on an APS-C sized sensor it will become around an 85mm focal length, that’s something to keep in mind if you are trying to set a scene up for use with the lens.

The following are two images of the same scene, one with a standard lens and the other shot with a Lensbaby Composer.

Standard Lens

Lensbaby Composer

Sample Images

Here are a few shots I have taken recently with the Lensbaby Composer:

Walking Down The Alley

Soft Kiss

El Cortez Sign

Sassy Sally w/Plastic Lens

Picket Fence w/Super Wide Lens

Learning to Use The Lensbaby Composer

The Lensbaby Composer is not the most intuitive or user-friendly piece of glass you will have in your arsenal. It is most likely the only manual focus lens you will own, the aperture is set by physically changing rings in the lens instead of from the camera controls, and it takes practice to get really good shots out of it consistently. That being said, the Composer is FAR easier to use than previous Lensbaby lenses so it will take much less practice than before.

What I really like about the Composer is that I really feel that “I” am making an image. I have to slow down my thought process and get things right in-camera. If your composition is off, you can’t just crop it and get a better image since the effect will usually not allow for much latitude when it comes to post processing. If you feel you are stuck in a photographic slump, pull out your Lensbaby lens and start making some fresh new images, it will inspire you to think differently and try new things.

At the recent PMA 2009 show, Sam from Lensbaby walked us through the Composer and all of the available accessories.

Should I Get A Lensbaby Composer Now?

.6 Wide Angle / Macro Lens

Only if you like getting things for free!

With your purchase of a Lensbaby Composer we have arranged for you to get a Wide Angle/Macro Conversion lens with your order. It adds even more possibility to your images.

The Lensbaby 0.6X Wide Angle Macro Conversion lens converts your Lensbaby’s 50mm focal length to 30mm, while keeping the Sweet Spot the same size as a Lensbaby photo taken without a wide angle conversion lens. Other wide angle conversion lenses shrink the sweet spot. You can unscrew the rear lens element for use as a macro lens that focuses as close as 2″ to 3″ from your subjects.

The Lensbaby 0.6X Wide Angle/Macro Conversion Lens is fully compatible with all Lensbaby SLR lenses. L:earn more about this special offer (link).

The Bottom Line

The Composer is certainly a speciality lens that not everyone is going to find a use for. However, if you want to be able to add a dramatic effect to your images and do it all in-camera then a Lensbaby composer is a must-have for your gear bag and at only $269.95 it is probably going to be the least expensive lens you own.

I have been using the Lensbaby lenses for several years and the Composer is my favorite of them all with its easier to use design and now with all the accessories, it is a very versatile lens that adds to my creative process.

Website: http://lensbaby.com

Amazon Links

Lensbaby The Composer for Canon EF mount Digital SLR Cameras
Lensbaby The Composer for Nikon F mount Digital SLR Cameras
Lensbaby Optic Boxed Set
Lensbaby Creative Aperture Kit
Lensbaby Macro Kit (AMACK)

Stretch your Lensbaby vision to the max with the new 0.42x Super Wide Lens, which converts your Lensbaby lens’s focal length from 50mm to 21mm. Specifically designed for compatibility with the Lensbaby Optic Swap System, this 0.42x is lighter and sharper than any other comparable product on the market. The 0.42x has an inherent macro capability, letting you as close as 2.75” (7cm) from the front of the lens. Click here to learn more, to see sample photos, and to order.

Lensbaby Double Glass Optic with Lensbaby 0.42x
Super Wide Lens
Lensbaby Double Glass Optic only
photo by Keri Friedman

The widest tilt-shift lens in Canon’s lineup, the new TS-E 17mm f/4L lens expands shooting possibilities exponentially on EOS Digital cameras. Designed with UD glass to minimize and compensate for chromatic aberrations, with specially coated aspherical elements for the highest possible glare-free image quality, this tilt-shift lens offers an angle of view of 93°. New TS revolving lets users freely combine tilting and shifting within the range of +/- 90° in the direction of movement. The lens also has an improved tilt & shift knob with an enhanced range of movement of up to +/- 6.5° and revolving lenses for better operability, it uses a circular aperture for beautiful out-of-focus areas and has an SWC lens coating to control ghosting and flare to a far greater degree than with earlier coating technologies.

TS-E 17mm f/4L

TS-E 24mm f/3.5L II

Want to make your shooting easier so you do less cropping in post production? CropLines has the answer with engraved focus screens for 8×10, Rue of thirds, school portrait, or other designs so that you can nail your image in-camera.

Many photographers use or are considering flash brackets so that you can keep your accessory flash above your camera regardless of whether or not you have your camera in its vertical or horizontal position. The Reporter Flash Ring is one of the simplest flash brackets I have ever seen Instead of a series of hinges and brackets, the Reporter Flash Ring has a rong around the lens that doesn’t move and the flash slides around on the ring on a set of rollers. The design is simple and effective.

While not everyone wants their own photobooth, if you are looking to make you own, check out the new photobooth software from TOFURIOS. Their photobooth software is the best I have seen so far.

Stay tuned, more to come!

It all adds up

If the visual references isn’t quite enough, then another way to think about it is to think of a perfect exposure as the combination of the right proportion of ingredients made up of ISO, Shutter Speed, and Aperture setting. If a perfect exposure = 9, and you have equal parts of Shutter, ISO, and Aperture, then you have a good mix (3+3+3 = 9). If you need to adjust one of the ingredients, then you have to adjust one of the others to come up with the same final number (2+4+3=9), subract from one, you have to add to another to make up the difference. If you have too much of one, without substracting from another, you end up with an overexposed image. Conversly, if you take away from one but don’t add another, you end up with an underexposed image.

The Sunny 16 Example

In a previous article we looked at the sunny 16 rule, this states that on a bright sunny day, a perfect exposure should be f/16, ISO 200, 1/200th of a second. (ISO and shutter are the reciprocal of each other). If we wanted a shallower depth of field and wanted a larger aperture like f/2.8, then since f/2.8 is 5 stops brighter than f/16, we would then need to compensate with either a lower ISO or a faster shutter. Increasing the shutter is the easiest in this example then we need 5 stops of shutter giving us a speed of 1/6400th of a second.

Low Light Adjustments

In low light we have the opposite issue, trying to get enough light into the camera. We only go so slow before we run into blurring issues with slow shutter speeds, and the aperture limit is going to be based on the lens we are using. If we still don’t have a bright enough exposure then we have to compensate by increasing the ISO speed.

Bringing it all together

While each setting can have an effect on the overall image quality, the sum of the three effect the overall exposure. For a refresher on the other settings, be sure and go back through these previous articles:

• Beginner’s Guide to Aperture
• Controlling Exposure
• The Sunny 16 Rule in Photography
• Capturing movement with shutter speed
• Understanding Depth of Field

Author: Kerry Garrison

Watsonville, CA (PRWEB) January 26, 2009 — ExpoImaging Inc. (www.ExpoImaging.net), developer and marketer of innovative camera accessories, including the Ray Flash Ring Light Adapter, ExpoDisc Digital White Balance Filter and the ExpoAperture2 Depth-of-Field Guide, today announced that it is now the exclusive U.S. distributor of Honl Photo Professional Products.

Developed by veteran photojournalist David Honl, The Honl Photo Speed System is a collection of lightweight, durable and affordable light modifiers for shoe-mount flashes including an assortment of grids, snoots, reflectors, gobos and gels. With retail prices ranging from $9.95 to $29.95, these practical tools were designed to universally fit all shoe-mount flashes without the use of annoying adhesives. As photographers increasingly take advantage of the power and flexibility of modern portable shoe-mount flashes, the Honl Photo Speed System allows them to affordably bring studio-style lighting effects into the field.

“With more than two decades of professional experience, David Honl’s work has been published worldwide,” said Erik Sowder, president of ExpoImaging. “David developed and field tested the Speed System while traveling on assignment under very challenging conditions. We firmly believe that there are no similar products available that are more practical or easy-to-use. And we are pleased that David recognized our sales and marketing success and chose ExpoImaging to be his exclusive U.S. distributor. We look forward to representing these innovative and unique lighting products.”

The Honl Photo Speed System consists of:
· The Honl Speed Strap: a simple, non-slip velcro strap that wraps around the flash head and attaches and removes in seconds. The Speed Strap avoids rubber bands, tape and sticky residue, and universally fits any shoe-mount flash. The Speed Strap provides a large wraparound surface area to quickly attach Speed Grids, Speed Gobos/Bounce Cards, Speed Snoots or Honl Gels. The Honl Speed Strap retails for $9.95.

· Honl Photo Speed Grids (patent pending): weighting just 3 oz and available in 1/4-inch and 1/8-inch grid, the honeycomb-like cells narrow the beam of light from a portable flash unit, producing a small circle of light on a subject. Perfect for dramatic lighting effects, Speed Grids fit any shoe-mount and most handle-mount portable strobes and attach quickly and easily to a Speed Strap. Honl Photo Speed Grids retail for $29.95.

· The Honl Photo Speed Gobo/Bounce Card: a versatile gobo made of black ballistic nylon on one side and white polymer on the other. The black side can be used to keep light from flaring into a lens when using a flash as a background or hair light. The white side can be used as a bounce card. Utilizing two gobos, photographers can create a barn door setup. The Honl Speed Gobo/Bounce Card attaches quickly with a Speed Strap. The Honl Photo Speed Gobo/Bounce Card retails for $14.95.

· The Honl Photo Speed Snoot/Reflector (patent pending): available as a 5-inch “Shorty” or 8-inch “Regular”, this snoot is constructed of black, ballistic nylon with a gray interior that produces a soft falloff. The snoot can be shaped to concentrate the light from a shoe-mount flash for dramatic cinematic lighting or opened-up to use as a flash bouncer/reflector. Ideal in a variety of settings, from basic portraits to dramatic background lighting, the Speed Snoot/Reflector attaches and removes in seconds using a Speed Strap. The Honl Photo Speed Snoot/Reflector retails for $29.95.

· The Honl Photo Gel Kit: colors strobes to correct for tungsten, fluorescent or daylight lighting environments or adds artistic color effects to images. These superior quality gels are pre-cut and have attached strips of velcro to secure quickly to a Speed Strap, and can be used in conjunction with Honl Snoots, Gobos and Grids. The usable gel area is 2.5 inches by 4 inches (approx. 64mm by 102mm) and can be trimmed to fit individual strobes. The Honl Photo Gel Kit retails for $29.95.

“We feel fortunate for the opportunity to partner with ExpoImaging,” said David Honl. “We chose to work with ExpoImaging because they’re good at marketing and they have a great reputation in the industry. We look forward to a long and mutually beneficial business relationship.”

The addition of the Honl Photo line further solidifies ExpoImaging’s position as a leading supplier of unique and exciting products that meet the needs of photographers at all levels.

Honl Photo Professional Speed System Products are now available at photo dealers nationwide and online by visiting www.ExpoImaging.net.

About ExpoImaging, Inc.

ExpoImaging Inc. markets and develops innovative camera accessories and is the pioneer in digital white balance filters. Ray Flash: The Ring Light Adapter, Honl Photo Speed System, ExpoDisc Digital White Balance Filters, and the ExpoAperture2 Depth-of-Field Guide are available at select photography dealers worldwide, or online at www.ExpoImaging.net.

###
David Griffin
Matter Communications — Providence
401-351-9504 (direct)
508-648-1176 (mobile)
dgriffinmatter (AIM)
david@matternow.com
www.matternow.com

Opening the Box for the first time

How Does It Work

Renting from BorrowLenses.com couldn’t be easier. Browse through their website and find the product you want, select the term of the rental you want, and select if you want to get the op

tional insurance (highly recommended). As soon as you place the order, an authorization hold in the amount of the order total is automatically placed on your credit card. This doesn’t withdraw funds from your card, but merely holds them. They will actually charge the credit card the day your order ships. (see their website for information on using debit cards).

Your package will arrive from FedEx ground and your rental period begins as soon as the package is dropped off.

Detail of the shipping box

My First Rental

I simply had to get my hands on the new Canon 5D Mk II and when I saw that BorrowLenses.com had the 5D Mk II available for rental I just had to get my hands on one. A few days later my package arrived with the 5D mk II, a manual, and battery charger all stuffed tight into thick foam padding.

It’s no surprise that the camera was in perfect

condition since it is brand new after all

Inside the box was instructions for sending the package back at the end of the rental period as well as a shipping label  When you are finished, simply pack it back up, seal it with some packing tape, slap the shipping label on the box and drop it off at any FedEx drop-off point.

The Cost of Renting

Canon EOS 5D Mk II

The big question is does renting something you will use on a regular basis make sense to rent versus purchase? Let’s say you really want to step things up and use some professional glass for your weddings, the 70-200 IS L f/2.8 lens will set you back around $1,600,then let’s assume you will need this lens for 15 different weekends over the course of the year. Since the lens will cost you $51 per week to rent, you would have to rent it 31 times before you would have spent enough to buy the lens, that’s two years of use that you can easily add to the cost of the individual jobs and not have to eat the entire $1,600.

Final Thoughts

There have been multiple times that I wished I could get a certain piece of equipment to rent but the local places are expensive, have a small variety, and require massive deposits.  The entire process with BorrowLenses.com is fast, easy, and painless. If you are wanting to try out a new piece of equipment before buying it, or if you need some extra for a special shoot, then do yourself a favor and call BorrowLenses.com. I will certainly be using them a number of times this year for different things. I will be evaluating the EOS 50D, Checking out Tilt-Shift Lenses, and probably using some high end glass for certain events. If you use them, be sure and tell them that I recommended them.

Author: Kerry Garrison

1. Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera’s LCD data panel may shows Battery will be exhausted soon or Battery must be recharged, even though the battery capacity is sufficient.
2. Fixes a malfunction that in rare occurrence causes an Err 06 Self Cleaning Sensor malfunction to appear on the camera’s LCD monitor and LCD data panel, even when the Self Cleaning Sensor Unit is operating normally. This message may appear depending on the timing of when the camera is switch to the ON position.
3. Fixes a malfunction that prevents correct colors from being printed when direct printing. RAW images captured using the camera’s custom Picture Styles (Emerald, etc.), which have been downloaded from Canon’s Web site and registered under User Def. 2 or User Def. 3.
4. Modifies the level of subject brightness that causes the AF-assist beam to fire when using an external Speedlite.
5. Enables an external flash connected to the camera’s synchro terminal to fire even when the camera’s built-in flash is popped up.

Source: http://web.canon.jp/imaging/eosd/eos40d/eos40d-firmware-e.html

Getting the Camera

Since I am not sponsored by Canon (any help here would be appreciated – wink wink) and I haven’t been able to justify the cost yet, I decided that another way to get one for a little while was to call up the good folks over at BorrowLenses.com. I hooked up with Max to get a weekend rental on the 5D Mk II so I could use it on a wedding shoot I had planned as well as to play around with the other features. If you have never rented equipment, you can’t go wrong by using BorrowLenses.com as their prices are great and you don’t get slapped with a huge deposit (no deposit in fact), but more about BorrowLenses.com in an upcoming article as I review their service.

I got the camera and couldn’t wait to slap in a card and start playing with it.

First Impressions

When picking up the body the first thing you notice is the surface has a much better texture on it than previous cameras making it easier to hold. The form factor is much like the 30D/40D/50D/5D. For users of those mentioned cameras, the control layout will be very familiar with the only noticeable exceptions being that the delete button has shifted due to the large screen and the top LCD illumination button has been moved to the right side of the display. For people moving up from a 30D/40D you will notice the lack of a pop-up flash and no preset modes on the mode dial (this is much more of a Pro camera than a consumer camera after all).

The large LCD on the back is just stunning with its much higher resolution display which enables you to better see if an image is sharp and in focus.

The new menu system is super clean and sharp looking on the big display although a little hunting around the first few times to find some of the features will be in order. The only thing that threw me for a loop for a minute was figuring out how to setup exposure bracketing. Not wanting to turn to the manual, I figured it out quickly enough. What I did have to crack the manual for was to figure out how to  use the video mode. Simple enough, go into Live View mode and press the Set button in the middle of the large dial on the back to start/stop recording.

First time setup

Before really being able to push the 5d Mk II to it’s limits, you will need to go into the menus and setup a few options first. Here are the things I did to get it ready for my tests.

C. Fn I : Exposure
Custom Function 3 changed to 1 to enable ISO expansion. This is needed to shoot at ISO ranges above 6400.

C. Fn II : Image
Custom Function 3 changed to 1 to enable Highlight Tone Priority. This enables Highlight Tone Priority which can help from overexposing important aspects of your image. Note however that when this is enabled, you will not be able to go over ISO 6400 regardless of the previous setting.

C. Fn III : Autofocus/Drive
Custom Function 3 changed to 1 to enable Multi-controller direct. This option enables you to select the autofocus point by using the multi-controller (mini joystick).

Live View Function Settings
LV Func. Setting set to Stills+movie, Screen Settings set to movie display

Image Quality
Image quality was set to RAW.

Finally, I made sure the date and time was correct, dropped in a compact flash card, formatted it and I was ready to go.

Shooting the 5D Mk II

Like many people getting the 5D Mark II, I have been shooting APS-C sized sensors for the past few years as I use a 30D as a primary and a 20D as a backup. Functionally, the 5D Mk II is virtually identical in how to operate the camera although the shutter sound is different and quieter. The big difference comes into play when using the same lenses you were using on the smaller sensor. If you aren’t familiar with this phenomenon, the smaller sensors in the 20D/30D/40D/50D are smaller APS-C size sensors versus the full frame sensor in the 5d Mk II. The smaller sensor size introduces an effect referred to as a zoom factor (also known as crop factor) which, in essence, magnifies the focal length of your lenses by 1.6.  To put it into simple terms, subjects on an APS-C sized sensor will appear closer (as if zoomed in by 1.6x) and the same lens on the 5D will give you an wider field of view. If we take a 50mm lens and put it on a camera with an APS-C sensor, what we get is basically an 80mm lens. A 70-200mm on the 50D becomes a 112-320mm lens on the APS-C sensor. This is interesting to note that a telephoto lens will get you more reach on a smaller sensor but you lose width at the smaller focal lengths. With my typical lenses, I now have to move closer to the subject to get the same effect as before, but I now have the added bonus of wide angle lenses being wider than before.

Image shot with 50mm on 30D (APS-C)

Image shot with 50mm on 5D Mk II (Full Frame)

Ok, so how about this ISO stuff, how good is it really? Yeah, well, its pretty damned good. On my 30D, it pained me to go up to 1600 ISO, on a 40D, 1600 would give you a very usable image but 3200 got to be a bit much, on the 5D Mk II, 3200 is a no-brainer and 6400 will give you very usable images. Moving up into 12,800 gets to be noisy but should be usable with a good noise reduction software while 25,600 ISO is basically unusable unless you convert the image to black and white and then you will get something looking like an older newspaper image.

Comparison of ISO settings from 5D Mk II

A feature that first appeared on the 40D is Highlight Tone Priority which can be a saving grace in numerous situations. Instead of going into how great this feature is, please refer to David Ziser’s post about Highlight Tone Priority.

What’s missing from the 5d Mk II?

Yes, the 5d Mk II is a huge leap forward for Canon, so much so that some shooters with the higher end 1Ds Mk III are actually “downgrading” to the 5D to get the improved sensor cleaning and higher ISO performance. But surely the 5D Mk II is not the Holy Grail of cameras, something must be missing right? Well, of course, otherwise it would be an $8000 camera. So what is it that we don’t have on the 5D Mk II that it’s big brother has?

• Dual memory card slots
  Many people think this is a major disappointment that the 5D wasn’t outfitted with dual memory slots to provide real-time redundancy when shooting.
• Built in battery grip/portrait grip
  The original 5D didn’t have one, and the 5D Mk II is aimed at the high end Pro-sumer market, not the professional market so this is an option. Unfortunately, the 5D Mk II uses a redesigned grip so existing ones will not work.
• Long life shutter
  The big gun 1Ds Mk III is rated as about double the shutter activations as the 5D Mk II (150,000 (5D) vs 300,000 (1Ds)).
• Dual Digic processors
  While the 5D Mk II does have the newer Digic IV processor, the 1Ds Mk III has dual processors for faster image processing.1

Granted, the higher ISO performance, larger, higher resolution LCD screen, improved dust reduction, 21 megapixel , full frame sensor, full HD video, and significantly cheaper price does make for a very compelling camera.

Focusing on Video

Yeah, the 5D Mk II is the Grand Poobah of DSLR’s that can shoot video with its full 1080p video capture. Being able to use all of the lenses at your disposal to shoot video is quite awesome indeed to achieve the same shallow depth of field that you can get in stills. So look out Sony, your days of being a video camera manufacturer have come to an end and the 5D Mk II is taking its rightful place of the King of all things video…..well….not exactly.

There is no question you can get stunning HiDef video out of the camera, there are plenty of examples online. But let’s look at the reality of shooting video with the 5D Mk II.

First off, abandon all hope of using autofocus when shooting video. If you are using the on-board microphone, you will hear constant whirrrr whirrrrrrrr whirrrrrrrr as the contrast-based autofocus “attempts” to focus. In some situations it may do alright, but the majority of the time you will end up with lots of times where the camera is trying to focus but tracks back and forth a few times before locking on. You really need to consider the camera as a manual focus camera when shooting video. Use autofocus in still mode to get your focus, then switch to video mode with autofocus off for best results. As for the built-in microphone (located just underneath the 5D logo), its alright for playing around, but anything serious will require an external mic plugged into the microphone jack on the side of the camera.

5D Mk II LowRez Video from Kerry Garrison on Vimeo.

Sample HiDef Video from 5D Mk II from Kerry Garrison on Vimeo.

Megapixels = Mega Storage

Oh sure, we all SAY we want more megapixels, but you really have to think of the ramifications of that. Here is a comparison of the same image taken with several of the different available image quality settings:

This means that a RAW file from the 5D Mk II is 4 times larger than a RAW from a 30D and even the 5D Mk II’s Fine JPEG is 2mb larger than the RAW file on the 30D. That’s 1/4 of the number of images I can fit on the same memory card and a typical wedding shoot for me will balloon from 10gb to 40gb. Add to that the additional disk space required to hold the images, and the addition computer horsepower (CPU and RAM) needed to process these huge files and you need some seriously beefy hardware to use this camera to its full potential.

For best results, UDMA Compact Flash cards are recommended, using these will speed up write times to the disc. Keep all of these things in mind if considering moving up to the 5D Mk II as it could turn out to be a bigger investment than just the camera itself.

Using the 5D Mk II

The first project I had was a small wedding reception, shooting out on a golf course at 11am presented some really harsh lighting conditions, the highlight tone priority system did a great job at keeping the subjects from getting blown out. One thing that I noticed was that the autofocus was really fast and super accurate. This is compared to the 30D that I normally shoot with. Normally I will get a handful of out of focus shots for no apparent reason, of almost 500 shots, there were only two that were out of focus, a significant improvement in the autofocus system over my camera.

The shutter noise is fairly quiet and doesn’t draw attention which is nice for quiet ceremonies and for catching candids without disturbing anyone.

For all your Shamu fans out there, here are some shots from Sea World.

5D Mark II - 70mm 1/640 f/9 ISO 200 Mode: Program sRAW1

5D Mark II - 70mm 1/5000 f/8 ISO 200 Mode: Program sRAW1

5D Mark II - 70mm 1/500 f/8 ISO 200 Mode: Program sRAW1

5D Mark II - 24mm 1/25 f/6.3 ISO 400 Mode: Manual sRAW1

5D Mark II - 42mm 1/60 f/2.8 ISO 400 Mode: Manual sRAW1

Is the 5D Mk II Right For You?

I only had the 5D Mk II available to me for a few days but I am completely impressed with it from a technology point of view. One of it’s biggest selling points is also one of its biggest problems, and that is the size of the images. A typical wedding will take up 30gb of space and just a simple day at an amusement park could easily eat up 6gb.  The ability to use the smaller sRAW sizes is a plus, but its painful to have to limit the camera, something I think I could get over easily enough but it remains to be seen if it is too limiting for doing paid wedding shoots in the reduced file format sizes.

Unless you already have a beefy uber-computer and have more compact flash cards than pairs of underwear, then there are going to be some hidden costs of getting into the 5D Mk II. I am probably fairly typical (or at least not abnormal) in that I am currently shooting with a 30D and put together some numbers as what it would take for me to purchase and use the 5D Mk II, and this is not upgrading the CPU or RAM in my machine as it isn’t that terrible to work on images with what I have.

That’s well over $4,000 with tax and shipping and isn’t counting having another as a backup. I would certainly recommend the 5D Mk II to anyone who can afford one, but, for myself, I need to take a look at the 50D before deciding to save up for the 5D.

Author: Kerry Garrison

Rental Equipment by: http://BorrowLenses.com

What is selective Focus?

We have talked about selective focus here numerous times using depth of field (here) (here) (here) and lenses such as the Lensbaby 3G. Selective focus simply means that the main subject of the image is in sharp focus while the rest of the image is blurred out, this forces the viewer’s eye to the section of the image that we want them to be looking at. This can have a dramatic effect on the image and give it a much more dramatic feel. The problem with simply using aperture settings to control the selective focus is it doesn’t allow you to control the shape, direction, direction, or opacity of the blur effect. With a Lensbaby lens you have more control over the sweet spot of the focus area but you are limited to a round pattern and you don’t have some of the other controls either, and you can’t do a true tilt-shift effect with a Lensbaby lens. With a tilt-shift lens you have more control in the different directions but you still can’t control some of the effect, a tilt-shift lens will also set you back over $1,000. This is where Focal Point comes in. You can use your high quality auto-focus glass to take a great picture, and then add a variety of selective focus effects to the image in post production.

Lensbaby Image

Comparison to using a specialty lens

Before jumping to conclusions, bear in mind that I am a fan of the Lensbaby lenses and I use them at different times to achieve a look that I know how to get in-camera. I have the new Lensbaby Composer and have a review of it coming as well. I know what that lens will do and I use it to create images like the one you can see here. You get a sweet spot where the lens is pointing and then there is a blurring effect that gets more intense the further away from the sweet spot you get. If you are a huge fan of doing things in-camera, then a Lensbaby is a great lens to use. However, the amount of effects that you can get is limited. If you have the time to swap lenses and get the image dialed in, the effect is very cool. If you don’t have a Lensbaby, or if you find later that you have a great shot that would have been even better with that effect, then you are out of luck without a re-shoot. With Focal Point, we can now add the effect in post production and get very similar results.

What can we get with Focal Point?

The best way to see what Focal Point can do is to take a look at several before and after images for comparison.

Original Shot		Focal Point Effect
Original Shot		Focal Point Effect

Using Focal Point

Focal Point installs as a Photoshop plug-in for Photoshop CS3 or CS4. Once launched you can move the “Focus Bug” around to select your sweet spot, and then grab on the handle to adjust the effect. You also have 3D effects that can control the focal plane by holding down the alt key on Windows or the Option key on the Mac and dragging within the focus bug.

Focal Point Plug-In Interface

On the right side of the interface are sliders for fine tuning the effect as well as adding a vignette effect and film grain into the blurred image. Any of the settings can then be saved as a preset for easy access at a later time.

Key Features of Focal Point

While we have mentioned most of them already, let’s take a quick look at the key features of the Focal Point plug-in:

• Focus Bug
  This unique control gives you very simple control over the effects. Just drag and click to move the sweet spot or to adjust the amount of effect.
• Aperture Shape
  While we have only looked at the round shape so far, you can also use a planer shape that simulates narrow depth of field that is often used with food or macro photography or for simulating the miniature effect that you can get with a tilt-shift lens.
• 3D Tilt
  As mentioned, you can adjust the tilt of the sweet spot to create the effect of a tilt-shift or view camera.
• Blur Types
  You can choose from a standard “defocused” look or add a bit of motion to the blur
• Add Layer Mask
  By default (you can turn this off if you want) a new layer is created in Photoshop containing the image with the effect applied. This allows you to change the opacity of the layer or paint out areas that you don’t want affected.
• Vignettes
  Focal Point allows you to add either a dark or light vignette effect to the image with the ability to adjust the amount of the vignette as well as the midpoint.
• Presets
  If you have created an effect that you like and may want to use again, you can save it as a preset within Focal Point so you can easily apply it to another image later.
• Film Grain
  While you may not think you want to add grain to an image, adding the film grain effect to the blurred image will help to maintain a realistic image as well as prevent posterization during printing.

System Requirements

Macintosh

• Mac OS X 10.4.10, 10.5 or Higher
• 1 GHz or faster G5 or Intel Core Processor(s)
• 1GB RAM (2GB+ recommended)
• 25 MB hard disk space for installation
• OpenGL 1.5 Compatible video card with 128MB VRAM at 1024×768 or higher.
• Adobe Photoshop CS2 (9.0.2) CS3 or Elements 4.0.1 and higher.
• Internet Connection & Flash 9 player
• Adobe Acrobat 6 Reader or higher

Windows

• Windows XP SP2, Vista or Higher
• 1 GHz or faster Pentium 4 processor(s) or equivalent
• 1GB RAM (2GB+ recommended)
• 25MB hard disk space for installation
• OpenGL 1.5 Compatible video card with 128MB VRAM at 1024×768 or higher.
• Adobe Photoshop CS2, CS3 or Elements 5 and higher
• Internet Connection & Flash 9 player
• Adobe Acrobat 6 Reader or higher
• Microsoft dotNET Framework 2.0 or higher

Focal Point Demo

Here is a video of Focal Point in action so you can get a feel for how it works.

Focal Point Demo from Kerry Garrison on Vimeo.

Results

Focal Point retails for $159.95 which puts it into the mid-range of prices for lenses from Lensbaby and is significantly cheaper than a tilt-shift lens.  Given that you have more control with Focal Point than you do with any type of lens, its hard to argue the value of Focal Point. There are certainly people like myself who enjoy using specialty lenses as they force you to slow down and really think about the image you are trying to make. Even for me though, there are times when I look at an image and wish I would have broke out the Lensbaby to take the shot and now I can get the effect that I want in post production. The effect that Focal Point creates may not be for everyone but if you shoot weddings, food, macro, still life, or nature shots, then Focal Point can add a new dimension to your images.

Product Review Scorecard

Product Page: http://www.ononesoftware.com/detail.php?prodLine_id=35
Company Page: http://ononesoftware.com

Author: Kerry Garrison

• Canon EOS 5D Mark II
• Canon PowerShot G10
• Panasonic DMC-G1**
• Panasonic DMC-FX150**
• Panasonic DMC-FZ28**
• Panasonic DMC-LX3**
• Leica D-LUX 4**

Adobe has also fixed a few bugs that were introduced with the Lightroom 2.0 release:

Lightroom 2 Bugs – Fixed

• Images rendered from the Slideshow export process produced a jagged effect on hard edges relative to the quality of normal JPEG export
• Increased the number of characters allowed in Web gallery labels beyond 150 characters
• Catalogs with hundreds of root (top level) folders caused very slow launch times
• Drag and drop to move a subfolder to a different folder showed the incorrect photos in the grid
• Print Sharpening produced edge artifacts in certain conditions
• Density defaulted to 100 percent for initial stroke regardless of position of slider
• The  Adjustment brush created blocky, straight edges to brush strokes under certain conditions
• Lightroom could become unresponsive when using the graduated filter under certain conditions
• It was possible to lose the ability to edit an adjustment brush setting after applying a graduated filter with hidden pins
• Turning auto-mask on produced a lag in Lightroom performance in when applying the adjustment brush
• Print to JPEG functionality produced a low resolution image when printing photos with panorama aspect ratios
• Extended characters in a folder name caused Edit in Photoshop functionality to fail
• Smart collection did not respond to changes in custom metadata
• Enabling auto-mask produced a lag in performance in when applying the local adjustment brush

Lightroom 2 Enhancements

• Camera profiles are now available in the Calibration panel in the Develop module.  These profiles are designed to provide different interpretations of raw capture.

**With the release of Camera Raw 5.2 (and upcoming Lightroom 2.2 release) there is an important exception in our DNG file handling for the Panasonic DMC LX3, Panasonic DMC FX150, Panasonic DMC FZ28, Panasonic DMC-G1 and Leica D-LUX 4. In this release the native, proprietary files from these cameras can only be converted to linear DNG files. A linear DNG file has gone through a demosaic process that converts a single mosaic layer of red, green and blue channel information into three distinct layers , one for each channel. The resulting linear DNG file is approximately three times the size of a mosaic DNG file or the original proprietary file format.

This exception is a temporary solution to ensure that Panasonic and Leica’s intended image rendering from their proprietary raw file format is applied to an image when converted DNG files are viewed in third party software titles. The same image rendering process is applied automatically in Camera Raw 5.2 and in Lightroom 2.2 when viewing the original proprietary raw file format.

In a future release Adobe plans to update the DNG specification to include an option to embed metadata-based representations of the lens compensations in the DNG file, allowing a mosaic DNG conversion. In the interim Adobe recommends only converting these files to DNG to allow compatibility with third party raw converters, previous versions of the Camera Raw plug-in or previous versions of Lightroom.

Adobe.com. (Mac, Win)

What is this aperture thingy anyway?

Inside each lens is a diaphragm that can open and close, the size of the opening at any given setting is what we refer to as the aperture setting. On our cameras we refer to specific size settings as f-stops such as f/2.8, f/5.6, f/11, etc. While the obvious value of adjusting the aperture is to control how much light enters the camera, there is a secret hidden world beneath the hood that we will need to get a grasp of as well, but let’s start at the basics first.

For a given ISO setting and shutter speed we can adjust the amount of light entering the camera by adjusting the aperture, a smaller diameter (higher f-stop value) will allow less light in, while a larger aperture (smaller f-stop number) will allow more light it. If we refer to the Sunny 16 rule, we know that on a bright sunny day, if we are using ISO 200 and a shutter speed of 1/200^th then we will get a good exposure at f/16. As the sun goes down and there is less light, we need to allow more light into the camera, we can do this by opening the aperture up (again, using a smaller number) to allow more light in. This sounds easy enough right?

Image showing relative sizes of aperture

If that is all there is to it, then this whole aperture thingy would be a piece of cake and life would be good. It is enough to get you going into how aperture plays a role in getting a good exposure, so it is certainly a lesson worth learning and understanding well.

Have you collimated your rays lately?

The opening of the diaphragm also will control cone angle of light coming into the camera and this is why adjusting the aperture can affect the depth of field. To see how this works use your thumb and pointer finger to make a big circle, with one eye closed look through that at a finger on your other hand held about 12″ away. This is going to simulate a large aperture, you will be able to focus on the finger but you will have far less focus on something across the room. Next, make the circle very small and look through it again (now simulating a small aperture), you will be able to focus on both your finger and something across the room equally well. The reason for this has to do with the angle of light coming into your eye, with the large circle, light is able to come in very straight which creates a shorter focal plane, with a smaller aperture opening the light comes in as a cone shape giving a longer focal plane. While this simple experiment has a very subtle effect (not everyone may even notice it working) in your camera it can have a dramatic effect on how your images look.

Factors that determine depth of field

There are three factors that will determine the amount of depth of field you will have in your image, and taking from a comment post from Photo Larry, this points out the different factors:

In a comment from an earlier post, Photo Larry provided this very simple guide:

• Distance from the subject (Close=shallow, Far=Deep)
• Focal Length (Short=Deep, Long=Shallow)
• Aperture (Small=Deep, Open=Shallow)

Aperture Setting
We have already covered this one, the larger the opening (smaller f-stop number) the shorter the depth of field will be.

Focal Length
The longer the focal length the shorter the depth of field will be. This is why you will get more blurring effect on telephoto lenses than you will with wide angle lenses. The most popular portrait lens is the 70-200 f /2.8 because as you back up from the subject and use the longer focal length with a large aperture the more the background will get blurred out.

Distance to Subject
The further you are away from the subject, the more depth of field you will have as well. This is much easier to see with a long telephoto lens, if you focus on something very close to you, much of the background will be blurry, as you focus on things further away less of the foreground and background will be blurry.

Two images with different aperture settings

Summary

Hopefully this will help you understand the basics of what your aperture setting can do for you and how to begin to use it to your advantage both in getting enough light into your camera and by being able to add some extra flair to your images using the depth of field.

Author: Kerry Garrison

With Extreme 24.5-Megapixel Resolution, Processed Image Files Exceeding 138 MB, Five Frame-per-Second Burst Speed and Nikon Core Technologies, the D3X Ushers in a New Level of Image Quality

MELVILLE, N.Y. (Nov. 30, 2008) - Nikon Inc. today announced the D3X, an FX-format digital SLR featuring extreme 24.5-megapixel resolution and superb low-noise capabilities, which provides professional photographers with commercial-quality image performance in a familiar and extraordinarily versatile D-SLR form factor. In conjunction with the groundbreaking Nikon FX-format D3, the D3X tops off a collection of flagship level, rugged, professional caliber digital single lens reflex cameras engineered to excel in all types of professional photographic disciplines from photojournalism and sideline sports, to commercial in-studio applications.

The foundation of the enhanced performance of the D3X is its FX-format, 24.5-megapixel (6048 x 4032) CMOS sensor providing commercial, high fashion, fine art and landscape photographers with the extreme resolution, dynamic range, color depth, detail and sharpness that clients demand. Whether creating catalogs, magazine covers, billboards or gallery prints, the large 5.49-micron pixel size and high signal to noise ratio produces vibrant images with breathtaking image fidelity while reducing lost highlights and shadows, and ensuring smoother tone reproduction with minimized noise. With full resolution shooting speeds of up to five frames-per-second (fps), and 14-bit files, that when processed are approximately 138 MB, the D3X offers today’s photographic artists an extreme level of performance and versatility ready for demanding assignments in the studio or on location.

“In 2007, the 12.1-megapixel FX-format D3 delivered groundbreaking digital SLR image quality, coupled with incomparable high ISO, low noise performance and high-speed handling. In doing so, the D3 broke photographic barriers, enabling photographers to work in ways never before possible,” said Edward Fasano, general manager for Marketing, SLR Systems Products at Nikon Inc. “Now, the new 24.5-megapixel FX-format D3X D-SLR provides the extreme resolution and high dynamic range capabilities needed to meet the extraordinary needs of photographic disciplines such as high fashion, commercial advertising and fine art. The D3X delivers this remarkable capability while fitting seamlessly within the Nikon system, taking full advantage of Nikon’s world-renowned collection of NIKKOR lenses and Speedlights.”

Image Quality Takes Center Stage
To re-emphasize the importance of image quality above all else, the D3X delivers an incredible level of digital SLR performance to provide photographers with extremely high resolution, exceptional dynamic range, phenomenal total gradation and outstanding color reproduction. Image files can be recorded as TIFF, JPEG or NEF (RAW) formats in either 12- or 14-bit compressed or uncompressed formats, and recorded to UDMA compatible CompactFlashâ„¢ cards for optimum speed. Photographers can save image files directly to the dual card slots as overflow, backup, or as separate file formats to different cards. Building on the D3X’s flexibility, users have the creative option to shoot in the 5:4 crop mode with 20.4-megapixel resolution, the ideal format for creating 8 x 10-inch portraits. While using DX-format lenses, faster continuous shooting of up to seven frames per second can be achieved at a resolution of 10.5 megapixels.

The exceptionally low noise of the D3X is essential to any professional commercial application, and it provides photographers with an ISO range of 100 to 1600, expandable to 50 (Lo-1) and 6400 (Hi-2). The ultra smooth tones and lack of grain at ISO 1600 as well as at low sensitivity settings result in smooth, natural skin tones and exacting detail that, before the D3X, required larger and far costlier studio-bound camera systems.

Advanced Technologies, Meticulously Executed
In a commercial setting or on location, imaging professionals need high performance in both speed and processing. The Nikon D3X can shoot at up to five fps at full resolution or up to seven fps in DX crop mode, allowing photographers to catch the split-second difference in a model’s expression or capture all of the action in a sequence. Just like the D3, the D3X achieves a start-up time of a mere 0.12 seconds and a shutter release time lag of 0.04 seconds.

The D3X’s speed, as well as high levels of performance, leverages Nikon core technologies including a newly enhanced EXPEED™ Image Processing System, specially designed for the D3X to provide superior image quality, faster processing speeds and lower power consumption. This advanced system is able to achieve extremely precise color reproduction for a broad spectrum of hues, in addition to vivid saturation and smooth gradation. What’s more, Nikon’s advanced noise processing function is engineered to minimize noise at all sensitivities and operate seamlessly without interfering with other image color parameters.

The D3X also features Nikon’s exclusive Scene Recognition System, which continuously analyzes information from the 1,005-pixel RGB light sensor, to further refine auto exposure, auto white balance and autofocus calculations. This results in flattering portraits and awe-inspiring landscapes that portray accurate color and fine details. Nikon’s exclusive 3D Color Matrix Metering II helps ensure accurate exposures, even in the most challenging lighting conditions. Instantly evaluating each scene before capture, input data from the system’s sensor is automatically referenced against an internal database of more than 30,000 images derived from actual photographs to calculate correct exposure values. Active D-Lighting, used in combination with 3D Matrix Metering II, helps to determines proper exposure, and creates realistic contrast while compensating for lost shadows and highlights. Prior to shooting, users can choose from Extra High, High, Normal, Low or Off settings, as well as an Auto mode.

Additionally, the D3X features Nikon’s exclusive Multi-CAM 3500FX focus module, with 51 AF points, 15 cross type sensors and 36 horizontal sensors that easily track and lock onto moving subjects, delivering the same fast and accurate AF performance that helped make the D3 immediately successful. Users can select any of the AF points, making it easy to consistently attain accurate focus right on a subject’s eyes, frame after frame. Additionally, three AF-area modes – Single point, Dynamic-area AF and Auto-area AF – are available to maximize the use of the 51 focus points by selecting the most suitable one to match subject conditions. AF is also available in one of two Live View modes optimized for the studio, including a phase detection handheld mode and a tripod mode. This feature allows the user to zoom in up to 27x on the LCD screen to ensure critical focus. While in Live View, the graphic indication of a virtual horizon is also available, making it easier than ever to confirm camera orientation.

To further ensure each photographer’s ability to balance their personal style, Nikon’s Picture Control System enables users to adjust their images to pre-set parameters such as Standard, Neutral, Vivid and Monochrome that apply tweaks to image sharpening, tone compensation, brightness, overall tone and saturation. Photographers have creative control over these image parameters with the use of up to nine available customizable presets.

Synchronizing Both Form and Function
Engineered for real-world functionality, the D3X retains a rugged shell with moisture, dust and shock resistance that has become a hallmark of flagship Nikon D-SLRs, while preserving the usability and ergonomics that allow the camera to remain an extension of the photographer’s vision. Attention to detail goes so far as to include a self-diagnostic shutter system that is tested to exceed 300,000 cycles for maximum durability and longevity. The camera’s body also maintains the resilient magnesium alloy construction and form factor of the D3, promoting consistent Nikon system synergy.

A bright and accurate viewfinder offers 100 percent coverage with 0.7x magnification. The body also houses Nikon’s acclaimed 3.0-inch super density LCD screen, now relied upon by so many photographers. The high-resolution 920,000-dot screen is viewable at wide angles up to 170 degrees, and will allow photographers to quickly zoom in to confirm critical focus. Users can also output the video signal to an external display via HDMI to allow client viewing. Thanks to incredibly efficient internal circuitry, the D3X can capture up to 4400* shots per single charge of the camera’s Lithium ion battery.

System Strength Withstands the Test of Time
The D3X is fully compatible with Nikon’s Creative Lighting System (CLS) to give photographers a mobile lighting solution that is easy to manage. To further enhance mobility, the D3X is compatible with Nikon’s GP-1 GPS receiver to gather information such as latitude, longitude, altitude and date of shooting. Photographers can easily shoot tethered via USB, or use the WT-4a wireless transmitter to send images wirelessly when speed and mobility are essential. D3X users will also enjoy the system strength of more than 50 genuine NIKKOR lenses that provide outstanding sharpness and high resolution across a broad range of focal lengths.

Price and Availability
The Nikon D3X will be available at Nikon Authorized Professional Dealers starting December 2008, and will be available for an estimated selling price of $7999.95.**

* Based on CIPA Standards
** Estimated selling price listed is only an estimate. Actual prices are set by dealers and are subject to change at any time.

I have had the hardest time dealing with camera bags over the years, from my first backback that got so heavy I couldn’t lug it around anymore to my uber cool Airport International 2.0 which is great for big jobs but what about when I want to go a little lighter? My old backback is too large, and my Airport International is too big, and my Modulous Speed Belt can’t hold enough nor is appropriate when traveling. So what does that leave? Fortunately, Think Tank Photo’s Mike Sturm has come to the rescue. Mike is the designer responsible for the newest and coolest backpack design from Think Tank Photo, the revolutionary ShapeShifter.

Why is the ShapeShifter so cool?
The problem with most camera bags is that they are designed for particular purpose, either trying to be lightweight and carry minimal equipment or being big enough to carry a large amount of gear. The ShapeShifter is designed for both, in expanded mode it can carry a couple of full size DSLR bodies, a few large pieces of glass, a good amount of accessories, AND a 17″ laptop.

Ok great, you can haul a bunch of stuff with you and your laptop easily, so what, the bigger rollers from Think Tank Photo allow you to do that easily enough. What is different with the ShapeShifter is that oncd your camera gear comes out (possibly moved to your Speed Belt) you can pull a zipper around and compress the backpack down to about three inches thick with your laptop still in it.

Features include:

• It can be compressed to 3 inches in width once your equipment is removed.
• Dedicated neoprene pockets for 2 pro size DSLR’s, 70-200 2.8, 24-70 2.8, wide angle 2.8, and strobes.
• Holds up to a 17” laptop in rear compartment.
• Front pocket organizers for your digital essentials.
• It can carry tripods and monopods.
• The Pro Speed Belt can be attached and quickly released.
• After your gear is removed, you can continue to carry your laptop and accessories, but in a much smaller package.

Who is the ShapeShifter for?
Since neoprene equipment bags inside the ShapeShifter don’t provide a lot of padding, the ShapeShifter is certainly not the best solution for travelers if there is any chance that your bag may have to get checked as luggage. For domestic flights the ShapeShifter is a great solution since domestic flights allow for a carry-on bag and a personal item such as a camera bag or laptop case. Since the ShapeShifter can hold you basic gear as well as your laptop you should always be able to carry it on and stuff it overhead or even under a seat.

Sports photographers who want an easy way to get their gear down onto the field but then want to compress the bag so there is a smaller profile to interfere with other photographers and easier maneuverability.

For photographers that use a modular belt system, you can remove most of your gear and still keep a few accessories and flashes in the backpack and still compress it to save space.

Any photographer that has to carry a laptop around safely as well as a decent selection of gear but doesn’t need a large backpack just to carry the laptop after the gear is taken out.

How well does it work?
I am super impressed with the versatility of the Shapeshifter already and have had it less than a week. I can carry a good selection of equipment comfortably and securely. The first day I got it I packed it up for a wedding with my Airport International Roller keeping the lesser used equipment and spares locked safely away, I could keep a small amount of gear with me at all times. The next day I took off to shoot a protest rally and loaded up with lenses and strapped my tripod onto the back. Out in the sun for a couple of hours all the extra shoulder and back padding made very comfortable to haul around a day pack of gear. A few days later I needed to make a day trip to San Fransisco to give a talk and I wanted a minimul set of gear along with my laptop. Even with a camera body, flash, several lenses, and my laptop I was able to compress the Shapeshifter down to the smaller size making it very easy to walk through the airports, take the BART into downtown, and walk to the convention center. Without the Shapeshifter I would have taken a large laptop case and probably not have taken any camera gear, or I would have taken a small camera bag that could hold a body and one lens. Thanks to the Shapeshifter I was able to take a 30D with battery grip, a 17-40 lens, a 24-70 lens, a 12-24 lens, and a 70-300 lens, and a 580 EX II. I could have taken some larger glass but then I wouldnt have been able to compress the bag down as much. Also in the Shapeshifter is the power supply for the laptop, a Zoom H2 audio recorder, and Jobo DSLR tripod.

The Shapeshifter isn’t going to be for everyone as there are some people who take too much gear everywhere they go and while the Shapeshifter can hold a decent amount of gear, it certainly can’t hold as much as the roller cases from Think Tank Photo. But if you need mobility and a roller is too inconvienent, the Shapeshifter is a great solution.

The bottom line
It didn’t take long for me to be a complete convert to the Shapeshifter for most of the assignments that I do although there are certain situations when I would rather have my larger roller with me. For the typical day assignment, for traveling, vacations, business trips, sports shooting, and many other situations, the Shapeshifter will be loaded up and hanging off my back.

The Think Tank Photo Shapeshifter backpack is scheduled for released in December of 2008 with a price of $249 US. If you have a photographer in the family that needs something like this, the Shapeshifter is an excellent Christmas gift.

Review Points

Setup
There is basically no setup of the Shapeshifter, open the zippers, load your equipment, adjust the straps, and off you go. If you want to use the monopod/tripod straps they are included inside the bag and will need to be attached to the outside before use. I keep the short sider attached at all times and when I am not using the long adjustable side I detach them and put them into a pocket in the bag to keep them out of the way.

Features
The Shapeshifter is like no other bag available today, loaded with more pockets than you would imagine and the ability to hold large equipment and compress down for smaller gear as well as having a padded laptop area that can take a 17″ laptop, the Shapeshifter is the ultimate in photographic mobility. Pockets galore! There are more pockets in this thing than you can count. The quality of the construction is simply incredible, I have full confidence this bag is going to last for many years.

Usage
Your biggest issue with the Shapeshifter is going to be deciding on what pocket of the dozens of available are you going to put your accessories in. Obviously this large number of pockets, holders, built-in bags, etc was built for someone with a better memory than me because there are so many places to put things you may well forget where something is. I am certainly a big fan of the Shapeshifter now and have taken it around to show all my friends.

Results
Sure, you can get a camera backpack on eBay for $30 and you may even be happy with it, but the ones I have bough have fallen apart, had the shoulder straps break, and are big and bulky. At $249 the Shapeshifter is not cheap, but neither is the contruction quality. Camera bags of this caliber are not designed for the budget-minded hobbiest, these are serious tools designed with professional photographers in mind. If you want to spend once on a backpack that will outlast several cheap ebay bags and you want to be sure you are not going to have zippers pop, seams break, and have it wear out prematurely then the Shapeshifter is the right choice.

Product Review Scorecard

Product Page: http://thinktankphoto.com/shapeshifter
Company Page: http://thinktankphoto.com

—-

Think Tank Photo Shapeshifter Camera Bag from Kerry Garrison on Vimeo.

• What is your favorite lens for portraits?
• How do you deal with inclement weather?
• What do you wear when shooting a wedding?
• How much equipment do you carry on you when shooting a wedding

Please feel free to send in your letters, questions, and comments to podcast@cameradojo.com, leave a message in the forums, or send us a message at twitter or facebook.

You can listen to this podcast now using our player widget in the right hand sidebar

This podcast is also available on iTunes.

Three new lenses – The Composer^TM, The Muse^TM, and

The Control Freak^TM – feature the Lensbaby Optic Swap System

On September 23, 2008, Lensbaby, LLC (formerly known as Lensbabies, LLC) is launching an entire new system of selective focus lenses at the Photokina tradeshow in Cologne, Germany (Hall 5.2 C021).

Three new Lensbaby lenses – The Composer^TM, The Muse^TM and The Control Freak^TM, – make up the new line of products.  Each features the new Lensbaby Optic Swap system. The new Muse and the new Control Freak replace the current Original, Lensbaby 2.0, and Lensbaby 3G lenses, which will be phased out immediately.  With the Composer, Lensbaby introduces a completely new lens, based on a ball and socket configuration that delivers smooth selective focus photography with unparalleled ease of use and greater precision.

All Lensbaby lenses provide photographers with a new way to control depth of field by bringing one area of a photo into sharpest focus with that Sweet Spot^TM surrounded by graduated blur. By bending the Lensbaby lens, the photographer moves the sharp area around the photo for customized creative effects.

The Composer

The new Composer retains its position after being bent and is easy to use even with one hand.  Photographers do not squeeze the lens to focus, but can simply tilt the lens to a desired angle and then focus with a barrel focusing ring.  The Composer stays in the desired bent position without requiring a locking mechanism and features the new Lensbaby Optic Swap System.  The Composer’s barrel focusing ring has a unique design that becomes more sensitive (requiring greater rotation to move the optic in and out) as you approach infinity, making it easer to focus on subjects from 10 feet to infinity.

“The Composer introduces a new level of ease and precision to selective focus photography,” said Craig Strong, Lensbaby president and co-founder.  “We developed the Composer because our photographers are interested above all in creating powerful, interesting photos. With its greatly enhanced ease of use and more reliable results, the Composer will make it more intuitive for photographers to realize their personal creative visions.”
The Muse replaces the Original Lensbaby and Lensbaby 2.0 lenses while being very similar in appearance and functionality. Photographers will still focus by compressing the lens and move the sweet spot by bending the flexible lens tubing.  The key update for the Muse is its new Lensbaby Optic Swap System.

The Control Freak

The Control Freak updates the Lensbaby 3G by adding the Lensbaby Optic Swap System.  With The Control Freak, photographers compress to focus, bend to move the sweet spot, and then push a button to lock the lens in place.  Once locked, photographers can adjust the fine focus with a barrel focusing ring and fine tune the tilt by rotating its three metal posts.

“While we expect the new Composer, with its smooth and precise operation, to be our most popular lens, we continue to offer the Muse and the Control Freak because each photographer has their own shooting style. The Muse is for photographers who shoot fast and loose and The Control Freak is best for shooters who have a step-by-step approach,” said Strong.

All three lenses – the Composer, Muse, and Control Freak – feature the Lensbaby Optic Swap System and will ship with one optic installed. Additional optics are available as optional accessories.  When a photographer wants to change the optic in their Lensbaby, they will simply pop the optic out and drop in a different optic using an Optic Swap Tool supplied with the new optic.  Each optic has different features and image qualities, allowing photographers to choose the look that fits their creative style.

Optic Swap System

At launch, the Lensbaby Optic Swap System will include four interchangeable optic options:

1)      Double Glass: A 50mm multi-coated optical glass doublet that is the same optic that was in the Lensbaby 2.0 and Lensbaby 3G lenses. Retail price: US$85.00

2)      Single Glass: a 50 mm, updated, uncoated optical glass singlet similar to the optic that was used in the Original Lensbaby. At f/2, the Single Glass Optic is one full stop brighter (2x as bright) than the previous Original Lensbaby Optic. Retail price: US$35.00

3)      Plastic: a 50 mm f/2 plastic singlet that maximizes blur and diffusion in a dreamy way that Holga^TM and Diana^TM camera lovers will especially appreciate. Retail price: US$35.00

4)      The Pinhole/Zone plate: an optic cup with an f/177 aperture hole to allow for pinhole photography and an f/19 Zone plate opening.  Users can slide a toggle inside the optic to change to back and forth between Pinhole and Zone plate mode, allowing further artistic exploration.  Retail price: US$35.00

The first three optics listed above are all 50mm fixed focal length.  They all feature magnetically levitating interchangeable aperture disks that allow aperture settings from f/2 to f/22.

The Single Glass, Plastic, and Pinhole/Zone plate optics will be sold individually as well as in an Optic Boxed Set to retail for $95.00.

Lensbaby President and Co-Founder, Craig Strong, stated, “Lensbaby photographers tend to be very creative. The new Lensbaby Optic Swap system will give photographers greater freedom to take photos that reflect their unique visions.”

Strong continued, “With the new Composer lens and the Lensbaby Optic Swap System, photographers will be able to choose a lens body that fits their bending style: fast and loose, smooth and precise, or step by step. Then photographers can choose an optic that expresses their individual artistic vision.”

Product Pricing and Specs:

The Composer – Smooth and Precise

• Priced at US$270
• Ships with the Double Glass optic installed (a multi-coated optical glass doublet)
• Features the Lensbaby Optic Swap system
• Focal Length: 50mm
• Focus Type: Manual
• Features a unique barrel focusing ring that becomes more sensitive (requiring greater rotation to move the optic in and out) as you approach infinity, making it easier to focus on subjects from 10 feet to infinity.
• Aperture Type: Interchangeable levitating aperture disks
• Apertures: f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16, f/22
• Minimum Focus: about 18″ (46cm) / Maximum Focus: Infinity
• Size/Weight: 2.5″ (6.35cm) high x 2.5″ (6.35cm)  wide  / 5.5 oz (155.9g)

The Muse – Fast and loose

• Priced at US $150 with the Double Glass optic installed; US $100 with the Plastic optic installed
• Ships with either the Double Glass optic installed or the Plastic optic installed.
• Features the Lensbaby Optic Swap system
• Focal Length: right around 50mm
• Focus Type: Manual…Fingertip, actually
• Aperture Type: Interchangeable levitating aperture disks
• Aperture: f/2, f/2.8, f/4, f/5.6, f/8
• Minimum Focus: approximately 12″ (30 cm) / Maximum Focus: Infinity and beyond
• Size/Weight: 2″ (5.08cm) high x 2.5″ (6.35cm) wide / 3.7 oz. (104.9g)

The Control Freak – Step-by-step

• Priced at US$270
• Ships with the Double Glass Optic installed
• Features the Lensbaby Optic Swap system
• Focal Length: 50mm
• Focus Type: Manual/Fingertip, with barrel fine focus
• Aperture Type: Interchangeable levitating aperture disks
• Aperture: f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16, f/22
• Minimum Focus: approximately 12″ (30 cm) / Maximum Focus: Infinity
• Size/Weight: 3″ (7.62cm) high x  3″ (7.62cm) wide / 5.7 oz. (161.6 grams)

About Lensbaby

Lensbaby, LLC (formerly Lensbabies, LLC) is a Portland, Oregon based manufacturer and marketer of award-winning selective focus SLR camera lenses.  Lensbaby was launched in February 2004 by Craig Strong, a professional photographer and the inventor of the patented Lensbaby selective focus SLR lens.  Lensbaby sells to photographers all over the world through its website, www.lensbaby.com, by calling 877-536-7222 / 971-223-5662, at tradeshows, in leading photo retailers and through a growing global network of international distributors.

# # # #

Press Release:

Canon brings HD moviemaking and 4fps shooting to its PowerShot super zoom series

United Kingdom / Republic of Ireland, 17 September 2008: Canon today supercharges its PowerShot digital compact camera range with two powerful new models: the 10 Megapixel PowerShot SX1 IS and PowerShot SX10 IS, which jointly replace the PowerShot S5 IS.

Both raise the benchmark for compact zooms with an outstanding 20x wide-angle (28mm) optical zoom, with USM and VCM for fast, silent, zooming. The  PowerShot SX1 IS offers a revolutionary series of features never seen before on a Canon compact camera – a 10 Megapixel Canon CMOS sensor, 4 frames per second continuous shooting, and full HD movie capture – while both cameras use Canon’s new DIGIC 4 processor for fast performance and richly detailed, clean images in a wide range of shooting situations.

Unbeatable reach
With a Canon 20x wide-angle (28mm) optical zoom lens, the PowerShot SX1 IS and PowerShot SX10 IS tackle everything from long-range telephoto shots to sweeping landscapes. Canon’s Ultrasonic Motor (USM) combines with Voice Coil Motor (VCM) technology for near-silent operation and the speed for sports or wildlife subjects. And thanks to Canon’s optical Image Stabilizer – which now offers a 4-stop advantage – camera shake blur is avoided even with the zoom fully extended.

10 Megapixel power
The PowerShot SX1 IS and PowerShot SX10 IS feature resolutions of 10 Megapixels, capturing all the necessary detail for poster-size prints or creative cropping in post processing. A Canon CMOS sensor allows the PowerShot SX1 IS to shoot full-resolution JPEGs at speeds of up to 4fps – making it a powerful, pocket-sized tool ideal for capturing fast-paced action sequences.

High Definition moviemaking
For the ultimate in visual quality, the PowerShot SX1 IS delivers 1080p (30fps) High Definition video – ready for instant playback on any HDTV via a built-in HDMI connection. The PowerShot SX10 IS offers fun, spontaneous VGA movie shooting. Movies on both cameras are enhanced with CD quality stereo sound, optical zooming and Face Detection Technology; and if extra reach is required, the PowerShot SX1 IS includes Canon’s Advanced Tele-Converter for an extra 2x zoom with no loss in movie quality.

DIGIC 4: intelligent processing for better photos
The PowerShot SX1 IS and PowerShot SX10 IS both feature Canon’s new DIGIC 4 image processor. As well as ensuring ultra-fast operation and superb, low-noise images, DIGIC 4 drives several intelligent technologies that make great photos easier than ever.

People shots benefit from improved Face Detection Technology, which even detects faces positioned at an angle to the camera, or in profile. Face Select & Track tracks a specific subject even more accurately, while a new FaceSelf-timer function – which automatically triggers the shutter shortly after a new face enters the frame – makes group shots and self-portraits easy.

Canon’s improved Motion Detection Technology delivers fantastic, sharp results by registering camera and subject movement, then automatically adjusting ISO to prevent image blur. Blur is further guarded against by new Servo AF, which continuously adjusts focus on subjects moving towards or away from the camera.

DIGIC 4 also powers Canon’s new i-Contrast feature, which brings out great, natural-looking detail in dark areas of pictures – without blowing out lighter areas.

Total Control
For the ultimate creative precision, the PowerShot SX1 IS and PowerShot SX10 IS offer full manual control over both aperture and shutter speed. A Multi Control Dial offers fingertip access to all key settings. Plus, compatibility with a range of accessories – including Canon’s professional Speedlite EX flash units – extends creative potential even further.

Also included with the PowerShot SX1 IS is Canon’s WC-DC300 controller, which allows wireless control of shooting and playback. This is ideal for tripod shots at slow shutter speeds, or any situation where keeping a distance from the camera is preferable.

“Both of these cameras offer exceptional imaging possibilities,” said Mogens Jensen, Head of Canon Consumer Imaging, Europe. “In particular, the PowerShot SX1 IS genuinely redefines what a compact digital camera can do. This kind of power and versatility must be experienced to be believed.”

Pricing & Availability
The PowerShot SX1 IS is available from December priced at £519.99 / €679.99 RRP inc VAT
The PowerShot SX10 IS is available from October priced at £359.99 / €469.99 RRP inc VAT

Features at a glance:

• 20x wide-angle (28mm, f/2.8) optical zoom with optical Image Stabilizer
• 10.0 Megapixels
• Canon CMOS sensor for full resolution continuous 4fps shooting (PowerShot SX1 IS)
• Full HD (1080p, 30fps) movies plus HDMI output (PowerShot SX1 IS)
• DIGIC 4 for outstanding images and fast response times
• Shooting modes include full manual control
• Great people shots with Face Detection AF/AE/FE/WB plus Face Select & Track and FaceSelf-Timer
• Targets every possible cause of blur with High ISO Auto, optical Image Stabilizer, Motion Detection Technology and Servo AF
• Auto Red-Eye Correction in shooting and playback
• i-Contrast boosts brightness and retains detail in dark areas
• 2.5” vari-angle LCD II with wide viewing angle plus electronic viewfinder (PowerShot SX10 IS)
• 2.8” widescreen vari-angle LCD II with wide viewing angle (PowerShot SX1 IS)
• Multi Control Dial and customizable My Menu
• Smooth, 30fps VGA movies (PowerShot SX10 IS)

• 21.1 Megapixel Full-frame CMOS sensor, 14-bit A/D conversion (16,384 colors/each of 3 primary color), wide range ISO setting of 100-6400 (expandable L: 50, H1: 12800 and H2: 25600).
• Full HD Video capture at 1920 x 1080 resolution for up to 4GB per clip with HDMI output for HD viewing of stills and video.
• Next generation DIGIC 4 Image Processor for faster processing of fine detail and color reproduction as well as reduced image noise.
• High performance with 3.9 fps continuous shooting, new shutter with a durability of 150,000 cycles and improved weather-resistant body.
• Live View Function for stills (Quick, Live and Face Detection AF modes) and video.
• 3.0-inch Clear View LCD (920,000 dots/VGA) monitor with anti-reflective and scratch-resistant coatings for improved viewing and smudge protection.
• Updated EOS Integrated Cleaning System specifically designed to work with a full-frame sensor.
• Compatible with over 60 Canon EF/EF-S lenses and most EOS System accessories.

The EOS 5D Mark II features a huge, full-frame sensor. A 21.1-megapixel CMOS sensor delivers images of up to 5616 x 3744 pixels. And since it is full-frame, all lenses will deliver the angle of view they would on a 35mm camera without a conversion factor. This comes in handy especially when shooting with wide-angle lenses. For the flexibility to shoot in even the most dimly lit situations, the EOS 5D Mark II offers Canon’s highest ISO sensitivity to date, ranging from 100-6400 (expandable to ISO L: 50, H1: 12800 and H2: 25600). Thanks to improved noise reduction technologies, images shot even at highest sensitivity will be remarkably smooth.

The Canon EOS 5D is slated to ship towards the end of November 2008 at an expected street price of US$2699 in the U.S.

We knew when we sat down to write this review that many of your would be sitting there thinking that the guys at the Dojo had totally lost it if all they can come up with for a product review is a simple camera strap. In all seriousness, we have appealed to every company we know to come up with a better camera strap. The two main issues we have are comfort for shooting all day long and the security that your camera won’t fall off your shoulder. If someone could solve these two basic issues then it would surely rate a full blown product review article, BlackRapid has done exactly that with the new R-Strap.

David using the R-Strap

Overview
Take 10 pounds or more of camera equipment and hang it on your shoulder for 8-10 hours and you are simply going to be sore, this is just something we have come to expect over the years. Some manufacturers have tried to overcome this with thick padded sections so while this may help a little the fact that the weight is still pulling down on one shoulder cannot be overcome. The second main issue is security. Most straps have some kind of rubberized surface to help keep them from slipping off your shoulder. We have never found a strap that combines both comfort and gives you confidence that it’s not going to fall off. I often carry two cameras at a wedding and am in constant fear that one of them is going to take a header onto the pavement, so when I know I am not going to use one for a while I bring the strap up over my head to make sure it won’t fall off, but this makes it very difficult to shoot. BlackRapid took this simple idea and created the R-Strap.

Kerry wearing the R-Strap

How it works
Think of the R-Strap as an oversize camera strap, but instead of the strap attaching to the standard strap mounts on your camera, it is a continuous loop. The camera is attaches to the strap via a sliding ring so the camera can move around without the strap moving. The sliding ring attached to the D-Ring on the bottom your tripod mount or via at attachment piece that comes with the R-Strap.

Because the strap goes around one shoulder and the camera rests at your hip on the opposite side, the weight of the camera feels more like its down the middle of your body instead of one shoulder. This is significantly more comfortable and it completely eliminates the possibility of your camera slipping off your shoulder.

When I first saw the R-Strap and tried it on, my first reaction was something like DUH!!!! How is it that the greatest minds on the industry that have taken us into the digital age and into sensors that can push 60 megapixels haven’t improved on the single most important interface you have to the camera since the introduction of the SLR?

I’m really being serious here. The lowly camera strap hasn’t been improved virtually at all and it took BlackRapid to finally take the basic camera strap and make it comfortable and safer around your neck. I really hope this makes the big camera makers feel stupid for not addressing this most basic needs of ALL camera owners.

In Shooting Position

Setup
Since the R-Strap connects to the D-Ring on the bottom of your tripod mount plate, many of us who keep the plate on our cameras have only to connect the strap to the D-Ring, adjust the length and stopper and you are set to go. This is FAR easier than trying to connect any traditional strap to a camera.

Once you have it on, you will want to adjust the length, this is going to be personal opinion but you will find there is a certain “sweet spot” that gives you the best position when the camera is down and allows you to bring it up fast and get the camera into position easily. There is piece that you will want to adjust down to the camera when it is resting at your side, this will help you to quickly position the camera and keep it from sliding back.

Adjustment Point

Usage
You first want to get the R-Strap adjusted properly. For most people you want to be able to pull the camera up and be able to hold it 6-7 inches away from your face, this will give you plenty of freedom to move around.

I will certainly admit I was a little uneasy at first dangling a couple grand worth of hardware on a $49 strap that connects to the D-Ring on the tripod mount, but within a short period of time I became very comfortable with it and the ease of using the camera with the R-Strap paid for itself over and over again. After while it becomes very natural to place the camera at your side and then reach for it and sling it into shooting position.

R-Strap hanging at David's Side

Results
Ok, so you have a strap that won’t fall off your shoulder, feels very comfortable to use, and doesn’t cost a fortune, But wait! There’s more! Not only does the R-Strap keep your gear secure, there is a side benefit of not being nearly as sore after a long shoot. Both David and I have both been using the R-Strap for about a month now and have shot a handful of weddings and events, because the weight is distributed differently, the neck pain normally associated with long shoots is greatly reduced. While the security and comfort make the R-Strap worthwhile, the comfort level makes it priceless. Every camera should come standard with and R-Strap!!

With the R-Strap I can easily put my camera down at my side and walk up to people to pose them without poking them with a big lens.” – David (Esquire Photography)

Summary
I’m sold! I am not taking the R-Strap off my camera! I vow to never use a regular camera strap again. David (Esquire Photography) is also a convert and uses a R-Strap on every shoot.

Final results:

Website: http://www.blackrapid.com
Author: Kerry Garrison

Source: http://www.usa.canon.com

Features

The official feature list is show here, we will dig into more of these later on:

• New 15.1 Megapixel CMOS sensor with improved noise reduction, wide range ISO 100-3200 (H1: 6400, H2: 12800), 14-bit conversion for smooth color tones and gradations.
• Next generation DIGIC 4 Image Processor for faster processing, 6.3 fps up to 90 JPEGS using UDMA CF cards; 60 consecutive JPEGS or 16 RAW using standard CF cards.
• 3.0-inch Clear View LCD (920,000 dots/VGA) with multiple coatings for improved viewing and smudge-resistant protection.
• Enhanced Live View shooting includes Face Detection Live mode.
• 9 cross-type high-precision sensors for accurate target subject acquisition and diagonal center cross-type AF point with f/2.8 and faster lenses.
• New Lens Peripheral Illumination Correction setting to automatically even the brightness across the image.
• Updated EOS Integrated Cleaning System with a fluorine coating for better resistance to dust.
• Creative Auto goes a step beyond full auto with on screen setting display.
• HDMI (High Definition Multimedia Interface) output for displaying full high-resolution images on a High Definition TV.
• Compatible with over 60 Canon EF/EF-S lenses and most EOS System accessories.

The new sensor

As expected, a new sensor is built into the 50D that improves the light gathering ability by using bigger micro lenses over each pixel. Effectivily this will give you 1 to 1.5 stop of better noise reduction allowing you to shoot at ISO 3200 and have images that have noise that is closer to what ISO 1600 looks like on the 40D. Like the previous 20,30,40, the 50D is an APS-C sized sensor giving is a 1.6x crop factor and delivers images at 4752w x 3168h pixels. The integrated cleaning system is also claimed to work better than the one built into the 40D.

The new processor
The next generation of the Digic processor, the Digic IV is debuted in the 50D. This new processor is claimed to be 30% faster than the Digic III and provides a plethora of new features.

• Full size RAW (15.06 megapixels), sRAW1 (7.12 megapixelss) and sRAW2 (3.76 megapixels)
• Three levels of High ISO Noise Reduction
• Three increments of Auto Lighting Optimizer
• Peripheral Illumination Correction – This is a vignette control based on profiles of Canon lenses
• ISO 100 – 3200 is standard along with extended ISO of 6400 and 12,800
  

Better Storage

Although many of us were hoping for dual card slots, the 50D still sports a single Compact Flash slot although support of UDMA makes for faster read/write speeds.

Better LCD

The LCD on the rear has been improved with more resolution giving you 920,000 pixels which now gives you even great clarity than previous models. The Live Mode provided through the read LCD has also been improved with two types of autofocus now available including a simple quick mode that toggles the Live View off while the camera performs the focus and Live autofocus that uses contrast detection like we saw possible when using DSLR Remote Pro for tethered shooting. Like many new point and shoots, the 50D now has face detection when using the Live Mode autofocusing.

Shipping and Price

The EOS 50D is supposed to be available sometime in October at $1,399. As the camera gets closer to the release date I am sure more information will become available, especially from some of the sites that get pre-production units to test.

For a detailed hands-on preview of the 50D, check out: http://www.dpreview.com/previews/canoneos50d/

Source: http://www.usa.canon.com