New LensPen SensorKlear Loupe® To Be Introduced at Photokina 2012

Ever since I first saw the SensorKlear Loupe and SensorPen, that is the only way I have ever recommended anyone to clean their sensors. Now, LensPen has come out with an improved design with twice as many LEDs and uses two AAA batteries instead of the original watch batteries. This is a MUST HAVE for anyone with a camera as it is the single best way to clean your sensor and doesn’t use any liquids that leave behind residue. For the complete press release, continue reading.

COLOGNE, Germany – The LensPen Group is introducing an improved new design of their SensorKlear Loupe at Photokina 2012. LensPen products are, as the Vancouver-based company says, photography necessities, not just accessories.

The new SensorKlear Loupe features eight LEDs, which is double the four of the original model, and they’re powered by just two AAA batteries – long life, low-cost, easy to install and available everywhere. And the new loupe is versatile; it’s designed to fit both standard and Four-Thirds DSLR cameras. It’s easy to use; just remove the camera lens, place the Loupe on the aperture ring and turn on the light.

When you clean your DSLR sensor using the LensPen SensorKlear system, you can see what you are cleaning while you clean. A feature no other sensor cleaner can offer. It makes sensor cleaning simple, fast and easy.

“The SensorKlear system is the ‘holy grail’ of sensor cleaning,” said Peter Meurrens, vice president of operations of the LensPen Group. “Other cleaning systems use sprays and gels that can make a sticky mess that spreads all over the delicate parts of your camera. Not only are they messy, you can’t even watch what you are doing when you use them.”

What was once a tedious, time-consuming – and nerve rattling – experience can now be done in less than a minute, Meurrens said.

“The heart of the SensorKlear system is simplicity,” Meurrens said. “You can clean your sensors with just three simple tools: the SensorKlear Loupe®, Hurricane Blower and SensorKlear II™ pen. All three are packaged in our SensorKlear Loupe Kit.”

Inspect the sensor. If it’s clear, there’s nothing left to do but put the lens back on. If the sensor is not clean use the Hurricane Blower to remove the dry dust. Inspect the sensor again.

If sticky dust remains on the sensor, insert the angled tip of the SensorKlear II pen through the access window on the side of the Loupe to safely and easily target and remove the sticky dust. Only the LensPen SensorKlear Loupe has the access window to allow the user to see and clean at the same time.

“The sensor can be cleaned in about 30 seconds,” Meurrens said. “Fast cleaning is also safe cleaning. There is less chance that a dust particle will enter the camera chamber during the cleaning process.”

For more information on LensPen products, go to www.lenspen.com

KerryG

Kerry Garrison lives in Castle Rock, Colorado with his wife and two dogs. With 10 years of experience shooting products and 5 years of experience in the wedding industry, Kerry brings a good deal of technical know-how and can explain topics in easy-to-understand terms.

You may also like...

Leave a Reply